stihl weed eater how to get string out

Stihl Weed Eater String Replacement: Step-by-Step Guide

By Amanda Jones
AD

Are you having trouble with your STIHL weed eater? Have you ever found yourself in the middle of trimming your lawn only to realize that your string has run out or is broken? Don't let this frustration get the best of you; here's a simple guide on how to get string out of your STIHL weed eater, ensuring you're always ready to tackle those pesky weeds.

Before we dive into the details, ensure you have the following tools and materials at hand: a screwdriver (usually a flathead), a new trimmer head (if replacing), and, of course, a fresh spool of string designed for your specific STIHL weed eater model.

Understanding Your Trimmer Head

First, let's grasp the concept of your trimmer's head. The trimmer head houses the spool of string, acting as a protective casing and allowing the line to feed out as required. Understanding this mechanism will help you visualize the process and make it easier to maneuver.

AD
Fastest Way to String Weed Eater
Fastest Way to String Weed Eater
Change String Stihl Weedeater Easy Method ! Bump Feed Head / Test Run
Change String Stihl Weedeater Easy Method ! Bump Feed Head / Test Run
How I Restring our Weed Eater (STIHL Bump Action Model FS 90R)
How I Restring our Weed Eater (STIHL Bump Action Model FS 90R)

STIHL weed eaters come with two types of trimmer heads: the Easy2Start and the standard bump-feed. The main difference lies in how the line feeds out, but the process of loading the string remains fairly similar across both models. We'll break down the process for each type shortly.

Identifying Your Trimmer Head Type

Take a closer look at your trimmer head. If it has a small lever on one side that you pull to dispense line, you likely have an Easy2Start head. If there's no lever and the line feeds out when you bump the head on the ground, you have a standard bump-feed head.

HOW TO: Refill the String on a Stihl FSA 57 Trimmer
HOW TO: Refill the String on a Stihl FSA 57 Trimmer

Pro Tip: Always refer to your owner's manual for model specifics, as there may be minor variations between models.

Removing the Old Trimmer Line

Begin by ensuring that your STIHL weed eater is switched off and has cooled down. Next, remove the trimmer head by turning it counterclockwise and pulling it off. If it's stuck, use a screwdriver to gently pry it off.

AD

If your trimmer head is the Easy2Start type, there should be two small holes where the line comes out. Pull the old line out through these holes, careful not to damage it. If you have a bump-feed head, there will be a single hole; just pull the line out of that hole.

Loading the New Trimmer Line

Now that you've removed the old line, it's time to load the new one. The process varies slightly between the two head types, but the basic concept remains the same.

Both types of trimmer heads follow a similar process: load the string, wind it around the spool, and pull the line through the hole(s) to secure it.

AD

Loading the String onto the Easy2Start Head

Push one end of the new line into the hole labeled "1" or "A" on the side of the trimmer head. The line should fit snugly, and you should feel it click into place.

Hold the line taut and begin winding it around the spool in the direction indicated by the arrow on the top of the spool. Keep an even tension as you wind to prevent loose or tangled line. Once the spool is full, leave about one foot of excess line, then poke this end through the hole labeled "2" or "B" on the other side of the head.

Loading the String onto the Bump-Feed Head

Find the hole on the side of the trimmer head. Push one end of your new line into this hole and pull it through, creating a small loop. You should have around six inches of line hanging out on the other side.

AD

Place the line back into the spool and begin winding it around in the direction of the arrow. Maintain an even tension and leave around six inches of line free once the spool is full. Velcro the loose end to the spool to keep it in place during use.

Reattaching the Trimmer Head

Now that your trimmer head is loaded with fresh string, it's time to reattach it to your STIHL weed eater. Ensure the line is nearly taut but not overly pulled, as this could affect the even distribution of line during use.

Push the trimmer head onto the shaft, turning it clockwise until it locks into place. If you have an Easy2Start head, be sure to engage the lever once the head is attached to ensure smooth line feeding.

There you have it! You've successfully replenished the string on your STIHL weed eater. Always remember to store your trimmer in a cool, dry place and clean or replace the line as needed to keep it running smoothly.

Next time you tackle those unruly weeds, you'll be equipped with the knowledge to quickly and easily refresh your trimmer line. Happy trimming!

AD