how to restring a weed eater stihl

How to Restring a Weed Eater Stihl: Step-by-Step Guide

By Michael Thompson
AD

Embarking on the task of maintaining your Stihl weed eater can be a breeze once you learn the techniques involved. Restringing your trimmer is one such task that can save you money and time, ensuring your tool is always ready for the next yard work challenge. Let's dive into this comprehensive guide on how to restring a weed eater Stihl.

Before we begin, it's essential to understand that Stihl produces a variety of string trimmers, each with slight differences in their threading methods. This guide will focus on the most common models, but we encourage you to double-check your specific model's manual if you're unsure about any steps.

Preparation and Gathering Materials

Before you start, gather the necessary materials and tools to help you complete the task efficiently:

AD
How to Restring a Stihl String Trimmer
How to Restring a Stihl String Trimmer
How To Refill a Spool on Stihl FSA 57 String Trimmer - AutoCut C 3-2 Linehead
How To Refill a Spool on Stihl FSA 57 String Trimmer - AutoCut C 3-2 Linehead
HOW TO Re-String A Weedeater Grass Trimmer
HOW TO Re-String A Weedeater Grass Trimmer
  • New weed eater string (ensure it's compatible with your Stihl model)
  • Scissors or wire cutters
  • Gloves (for safety)
  • Your Stihl weed eater

Once you've collected all the required items, find a well-lit, flat workspace to perform the restringing. Now, let's move on to dismantling your weed eater for restringing.

Disassembling Your Stihl Weed Eater

To access the spool, you'll need to disassemble the head of your weed eater:

Fixing A Stihl Trimmer That Won't Start
Fixing A Stihl Trimmer That Won't Start
  1. Unplug your Stihl trimmer from any power source to ensure safety.
  2. Locate the spool cover on the underside of the trimmer head. On most Stihl models, this is a small, circular protective cover.
  3. Using your fingers or a flathead screwdriver, carefully pry off the spool cover. It may take some force, but be patient to avoid damaging it.

With the spool cover removed, you should now see the old weed eater string wound around the spool.

Removing the Old String

Before you can replace the old string with a new one, you'll need to remove the existing line:

AD
  1. Locate the ends of the old string. There should be two: an active line and a reserve line.
  2. Grab both ends and pull gently but firmly to unwind the string from the spool.
  3. Continue pulling until the entire length of the old string has been removed from the spool. If the string resists, you may need to snip it with scissors or wire cutters.

With the old string removed, you're now ready to install the new string onto your Stihl weed eater.

Restringing Your Stihl Weed Eater

Before you begin threading the new string, ensure it's compatible with your Stihl model. You can generally determine this by the width of the line (achen's) and the packaging information. If in doubt, consult your user manual or contact Stihl customer service.

Loading the Spool

To load the spool with your new weed eater string, follow these steps:

AD
  1. Find the eyelet on the spool. This is typically a small hole or notch where you'll insert the new string.
  2. Take one end of the new string and insert it into the eyelet, pulling about 6-10 inches (15-25 cm) of line through.
  3. Wrap the string around the spool in a clockwise direction (when looking at the spool from above). Ensure you maintain some tension on the string to prevent it from becoming loose or tangled.
  4. Winding the string around the spool should look like a spiral, with each loop touching the previous one. Aim for about 6-10 layers of string, depending on the size of your spool.
  5. For most Stihl models, you should leave a tail of about 6-10 inches (15-25 cm) of string hanging from the last wrap. This will become the working line when you're trimming.

Reassembling Your Stihl Weed Eater

Now that the spool is loaded with new string, it's time to reassemble your weed eater:

  1. Reattach the spool to the trimmer head, ensuring the tail of the string is on the outside and the end is pointed towards the center of the head.
  2. Carefully snap the spool cover back into place, ensuring it's securely fastened.
  3. Plug your Stihl weed eater back into the power source, and you're ready to go!

By following this comprehensive guide, you've now successfully learned how to restring a weed eater Stihl. Regularly maintaining your trimmer by replacing the string will keep it in optimal working condition, ensuring a clean, even cut for your lawn. Happy trimming!

AD