how to restring a dewalt weed eater

Mastering Dewalt Weed Eater Restring: Step-by-Step Guide

By Kevin Lee
AD

The hum of your trusty Dewalt weed eater—the gardener's trusty sidekick—may have begun to wane, hinting that it's time to replace its strings. But don't let that signal a trip to the store just yet. With our step-by-step guide, you'll learn how to restring a Dewalt weed eater like a pro, ensuring your tool stays ready for action and your lawn pristine. Let's dive in.

Restringing your Dewalt weed eater may sound daunting, but don't let that intimidate you. This task, once mastered, takes just minutes, saving you time and money. So, buckle up as we guide you through a seamless restring process.

Gather Your Tools and Materials

Before you start, ensure you have all the necessary tools and materials at hand. For this task, you'll need:

AD
How to change/restring Dewalt weed eater 2019 (New type Dewalt head type)
How to change/restring Dewalt weed eater 2019 (New type Dewalt head type)
How to Change the String on a Dewalt 20v String Trimmer
How to Change the String on a Dewalt 20v String Trimmer
How to replace Dual String Trimmer line for DeWALT trimmers / Jon's DIY
How to replace Dual String Trimmer line for DeWALT trimmers / Jon's DIY
  • A new Dewalt weed eater string or trimmer line, matching your current string's diameter.
  • A scissors or[string cutter](https://www.dolson.com/dolson-string-and-nylon-cutter) for trimming the string.
  • An empty socket wrench (13mm) if you have a Dewalt FLEXVOLT or 20V Max* weed eater.
  • Gloves and safety glasses to protect your hands and eyes from debris and stray string ends.

With your tools and materials ready, let's proceed to the next step.

Disassemble the Weed Eater Head

Safety first! Unplug your Dewalt weed eater before starting any disassembly or restringing. Here's how to dismantle the tool's head:

ECHO weedwacker relined in less than 1 minute
ECHO weedwacker relined in less than 1 minute
  • Turn the weed eater upside down, with the cutting head facing up.
  • Locate the small hole or button on the top of the head.
  • For 20V Max* weed eaters, press the button with your finger or an empty socket wrench, and pull the spool out gently.
  • For FLEXVOLT models, use the 13mm socket wrench to turn the wind-up andrelease the spool.

With the spool removed, you're halfway there!

Choosing the Right String

Picking the correct string is crucial for smooth operation and longevity of your Dewalt weed eater. Ensure the new string matches your current one in diameter and type: .080", .095", or .105" heavy-duty semi-lock twister line.

AD

dissatisfaction with frayed, weak, or inadequately performing strings. Stick to genuine Dewalt strings or trusted reformulations for optimal results.

Preparing the New String

Before installation, prepare your new string by pulling out about four to six feet of it. You'll need this extra length for reloading the spool and making adjustments later. If your string is too long, you can always cut it down later, but you can't add more if you're short.

Once you've pulled out the necessary length, trim both ends of the string to prevent fraying. This small preparatory step ensures smooth operation and prevents future tangling.

AD

Wind the New String onto the Spool

Now that you've got your new string prepared, let's load it back onto the spool.

Folding the String

Create an 'eye' with the string's excess length. To do this, fold the string back on itself, creating a small loop with a tail on either side. The loop should fit snugly around the spool's center, while the tails will wrap around the 'eye'.

Tuck the 'eye' into the spool's center while hooking the tails around the 'eye'. This initial fold ensures proper exit direction for your string when in use.

AD

Loading the Spool

With the 'eye' tucked and tails hooked, begin winding the string onto the spool. Corporate guideline: Wind the string against the direction of rotation, which is counterclockwise for most weed eaters. This technique helps prevent string tangling during use.

Loop the string around the spool, tucking it into the depressions as you go. Keep the tension even and maintain the string's alignment with the spool's edge. When you've wound on about four feet of line, you're done!

Reassemble and Cut the String

Now it's time to put everything back together and prep your Dewalt weed eater for duty:

  • Reinsert the loaded spool into the weed eater head, ensuring it locks into place.
  • Replace any covers or protective shields you removed earlier.
  • With the weed eater still upside down, pull the free string tail to release the string from the 'eye' at the spool's center. Your string should now hang freely.

Finally, use your scissors or string cutter to trim the excess line to the desired length, usually about 8-10 inches. The trimmed string should clear the housing of your weed eater but not hang too low, which could cause unwanted contact with the ground or pebbles.

There you have it! Your Dewalt weed eater is ready to tackle those overgrown weeds once more. Restringing your tool not only saves you money but also ensures you always have the right string for the job. Happy trimming! Next time your string wears out, you'll know exactly what to do.

AD