how to restring dewalt weed eater

Dewalt Weed Eater Restring: Step-by-Step Guide

By Thomas Harris
AD

Refreshing your weed eater's string might seem like a daunting task, but with the right guidance, it's a straightforward process that can extend the life of your Dewalt tool. Whether you're a seasoned gardener or a DIY enthusiast, this comprehensive guide walks you through the steps to change the string on your Dewalt weed eater, ensuring your tool is always ready for those pesky weeds.

Before we dive in, let's clarify why restringing your Dewalt weed eater is crucial. Regular string changes maintain your tool's efficiency, prevent frustrating downtime, and ultimately save you money by extending the life of your weed eater. Now, let's get down to business and explore the two main types of Dewalt strings: the standard bump-feed and the automatic feed, and how to restring each.

Restringing Dewalt Bump-Feed Weed Eaters

The Dewalt DC080B, for instance, is a popular bump-feed model. Learning how to restring this type of weed eater will help you keep your tool in top shape. Remember, safety is paramount, so make sure your tool is unplugged and cool before starting.

AD
a close up of a person holding a hockey boot
a close up of a person holding a hockey boot
How to Change the String on a Dewalt 20v String Trimmer
How to Change the String on a Dewalt 20v String Trimmer
How to replace Dual String Trimmer line for DeWALT trimmers / Jon's DIY
How to replace Dual String Trimmer line for DeWALT trimmers / Jon's DIY

Preparation is key. Gather the necessary tools - your new Dewalt string, a flathead screwdriver, and safety glasses - to ensure a smooth restringing process.

Identifying the String Feed Head

First, locate the string feed head on the top of your weed eater. This is where the spool of line is housed, and it's usually secured with a small, visible knob or button.

HOW TO Re-String A Weedeater Grass Trimmer
HOW TO Re-String A Weedeater Grass Trimmer
Dewalt 20v String Trimmer Problems? Here’s How To Fix Them Fast
Dewalt 20v String Trimmer Problems? Here’s How To Fix Them Fast

The Dewalt DC080B, for example, has a unique path for threading the string. Familiarize yourself with your specific model's design to avoid frustration later on.

Removing the Old String

Begin by removing the old string. Hold the weed eater vertically, line head up, and remove the spool cover. Use a flathead screwdriver as leverage to gently pry it off. This should expose the spool, which you can then carefully and slowly remove.

AD

Next, unwind the old string from the spool. Be mindful of the direction of the line, as it's crucial for proper feeding. For bump-feed models, the string should unwind in a clockwise direction, away from the spool's center.

Preparing the New String

Measure out about 10 to 15 feet of new string, depending on your weed eater's capacity. Most Dewalt models can accommodate between 10 to 20 feet of line. Always refer to your tool's user manual for specific model details.

Cut the string at an angle, creating a small, sharp point at one end. This will facilitate feeding the line through the various guides and around the bump feed head.

AD

Threading the New String

Start threading your new string from the top of the weed eater. Insert the pointed end of the string through the hole in the line head, pulling a few inches through. Make sure the sharp point is facing up, pointing towards the trimmer head.

Route the string through the designated guides, keeping the sharp point in front, until it reaches the bump feed head. Here's where it gets unique. For Dewalt bump-feed weed eaters, insert the string into the hole directly beneath the bump button, pulling the line through until about 8 to 10 inches remain on the outside.

Reinstalling the String Spool

Now that your string is correctly threaded, reinsert the spool into the weed eater. Remember the direction of the line - for bump-feed models, it should be clockwise. Wind the string several times around the spool, applying even tension as you go.

AD

Replace the spool cover, ensuring it's securely fastened. You're now ready to test your tool. Gently pull the remaining string out through the eyelet, leaving a 6 to 10-inch tail. Your Dewalt bump-feed weed eater is now restringed and good to go.

Testing the String

Plug in your weed eater and, holding it vertically, pull on the string's end to engage the bump-feed mechanism. The spool should rotate freely, releasing line as you bump. If everything works as expected, trim your way to a neat lawn!

Restringing Dewalt Automatic Feed Weed Eaters

Models like the Dewalt FC059 have automatic feed mechanisms, which make restringing a bit more user-friendly. Don't let the automated aspect intimidate you, though; the process remains straightforward.

As with any restringing job, ensure your tool is unplugged and cooled down before starting. Always wear safety glasses to protect your eyes from any debris or flying string ends.

Locating the String Feed Head

Find the string feed head on top of your weed eater, usually marked with a line or a spool. In the Dewalt FC059, you'll see a rotating dial that controls the feed rate.

With automatic feed models, you typically don't need to remove the spool. Instead, you'll usually find a simple, molded plastic base that secures the spool and provides a small compartment for string leftover. Familiarize yourself with this setup to avoid confusion later.

Removing the Old String

First, unwind about 10 inches of the old string from the spool, leaving enough line to pull on when you're ready to trim again. For automatic feed models, the string generally spools in a counter-clockwise direction, towards the center of the spool.

Preparing the New String

Measure out about 15 to 20 feet of new string, cut at an angle to form a sharp point at one end. The exact length will depend on your tool's capacity, typically around 20 feet for Dewalt automatic feed weed eaters. Always double-check your specific model's string length guidelines.

Threading the New String

Begin threading your new string by feeding the pointed end under the string cap or through any dedicated holes in the head of your weed eater. The sharp point should face upward, in the direction of the trimmer head.

Route the new string along the guides, keeping the sharp point in front. On automatic feed models, you'll usually find a large, clearly defined path for the string, leading up to the cutting head.

Securing the String to the Spool

Once you've directed the string through the guides and reached the spool, you'll need to secure it to the inside of the spool. Here's where some manual dexterity comes in. On Dewalt automatic feed weed eaters, you'll often find small holes, notches, or even a small claw-like clip designed for this purpose.

Weakly hold the string with your thumb, pressing it gently into the provided notch or securing it under the clip. This will hold the string in place and allow you to properly wind it onto the spool.

Winding the String onto the Spool

Now, you can begin winding your new string onto the spool. Wrap the string around the spool, applying even tension as you go. Leave the last few inches of the string loose, as this will serve as your "cut cord" for trimming.

Once you've finished winding, tuck the loose end of the string into the spool's center, securing it underneath the existing windings. This helps prevent the string from unraveling when you begin using your weed eater again.

Testing the String

Your Dewalt automatic feed weed eater is now restringed and ready for use. Plug in your tool and, holding it vertically, pull gently on the free end of the string. The spool should rotate freely, releasing the pre-determined amount of line. Adjust the feed dial if needed to regulate the feed rate.

Regularly maintaining your Dewalt weed eater, including restringing it properly, ensures a long lifespan and optimal performance. So, the next time you're faced with a stubborn weed infestation, grab your trusty Dewalt, confident that it's ready to take on even the toughest weed challenges.

AD