Stihl Weed Eater String Replacement: Step-by-Step Guide
String trimmers, like those from Stihl, require regular maintenance to ensure optimal performance. One of the most common tasks is changing the weed eater string, also known as line. This guide will walk you through the process of how to change weed eater string on a Stihl trimmer, step by step.
Before we dive in, remember that safety is paramount when handling power tools. Always unplug your Stihl trimmer and allow the spool to stop completely before you begin. Also, refer to your specific Stihl model's user manual for any model-specific instructions.
Understanding Your Stihl Trimmer's Spool
The first step in changing your Stihl trimmer's line is understanding the type of spool you're dealing with. Stihl uses two types of spools: the Easy2Start (EASY) and the automatic feed spool. This guide will cover both types.
Before you proceed, identify your spool type. The user manual should help you determine this. If you're unsure, you can always look up your model online. Once you've identified the spool type, proceed to the appropriate section.
Identifying an Easy2Start (EASY) Spool
Stihl's EASY spool is designed for easy, no-tension line feeding. If your Stihl trimmer has a bright orange spool that releases line with a simple pull of the feed head, you have an EASY spool.
If this sounds like your Stihl trimmer, skip to the next subheading, "Removing the Head Cover", to start the process of changing your weed eater string. If your spool is not orange and does not release line with a simple pull, you have an automatic feed spool.
Identifying an Automatic Feed Spool
Stihl's automatic feed spool is intended for effortless line advancement just by bumping the trimmer against the ground. If your Stihl trimmer has a black or grey spool that requires a bump to release more line, you have an automatic feed spool.
If this is the case, start at the next main topic, "Preparing to Remove the Spool". If not, please double-check your spool type as this guide will not be applicable.
Preparing to Remove the Spool
Before you start removing the spool, make sure your Stihl trimmer is unplugged and the engine is cooled. This is crucial for your safety and the longevity of your tool.
Next, locate the bump feed head on top of the trimmer head. There should be a small tab or button that allows you to release more line. Tuck this tab or button out of the way to give yourself enough room to work.
Removing the Head Cover
Now, locate the head cover on your Stihl trimmer. The head cover is the plastic piece that houses the spool and line. Remove it by pulling it straight up or unscrewing it counterclockwise, depending on your model's design.
Once the head cover is off, you'll see the spool. Secure the spool in place with one hand to prevent it from spinning while you work. You're now ready to remove the spool itself.
Removing the Spool
Many Stihl trimmers have a spool that winds clockwise when viewed from above. To remove the spool, turn it counterclockwise by hand. If your spool is resistant, use an adjustable wrench to carefully twist it counterclockwise until it's free from the trimmer's shaft.
If your Stihl trimmer has a retainer clip or nut holding the spool in place, gently remove it with needle-nose pliers. Be careful not to bend or break it, as you'll need it to reassemble the trimmer.
Installing New Weed Eater String
Now that the old line and spool are removed, it's time to install new string. Stihl recommends using their original or a Stihl-approved replacement string. Always use the same diameter and type of line as originally equipped.
Before you begin, cut your new string to the appropriate length. The length depends on your trimmer's size and your preference. A good starting point is to cut the string to twice the spool's capacity, as listed in your user manual.
Loading the String onto the Spool
With your new string cut to length, you're ready to load it onto the spool. Begin by threading one end of the string through the hole in the spool's center. If your spool has an arrow indicating the winding direction, ensure the string is correctly threaded and facing the right direction.
With the string secured in the spool's center hole, start winding the string clockwise around the spool. Ensure you wind the string tightly and evenly to prevent any kinking or binding during use. Continue winding until you've reached the appropriate length, leaving a small tail of string (about an inch or two) for installation.
Reassembling the Trimmer Head
With the new string wound tightly around the spool, it's time to reinstall everything. Begin by reinserting the spool onto the trimmer shaft. If you removed a retainer clip or nut, replace it securely, but be careful not to overtighten it.
Next, reattach the head cover. Depending on your model, you may need to twist it clockwise to secure it, or simply push it straight down until it clicks into place. Once the head cover is on, make sure it's properly secured and the string is fed through the hole in the side of the trimmer head.
Finally, plug in your Stihl trimmer and test the new string by starting the engine and cutting through some small pieces of plastic or cardboard. This will help you ensure that the new string is feeding correctly and evenly. Once you're satisfied with the performance, you're ready to tackle those weeds!
That's all there is to changing a weed eater string on your Stihl trimmer. Remember to regularly maintain your trimmer by replacing the line when it gets low or worn. This will help ensure your Stihl trimmer stays in top shape for years to come. Happy trimming!