Troy-Bilt TB35EC String Trimmer Replacement: A Step-by-Step Guide
If you're a proud owner of a Troy-Bilt TB35EC riding lawn mower, you know the importance of keeping its string trimmer in top shape for a pristine lawn. Replacing the string on your TB35EC isn't as daunting as it might seem, and with a little know-how, you can keep your mower's edges tidy and efficient. Let's dive into how to change the string on your Troy-Bilt TB35EC, making sure to follow safety protocols and maintain your mower's high performance.
The process involves simple steps, and we'll break them down for you, ensuring you're on your way to a well-maintained lawn right around the corner. Before you start, ensure your mower is turned off, cooled down, and doesn't have any fuel in it. Safety first, always!
Preparation and Safety Measures
Before you embark on this DIY journey, it's crucial to prepare your mower and ensure your safety. Here's how you can set up your workspace for success:
1. **Park your mower on a flat surface** to make the process easier and more comfortable. The last thing you want is to strain your back or drop parts because of an unbalanced surface.
2. **Clean your mower** to have a clear view of what you're doing and avoid unnecessary dirt and debris getting into your eyes or cuts. A simple wipe-down should do the trick.
Gather Your Tools
Before you start, make sure you have these tools and materials within reach:
- New mower string (ensure it's compatible with your TB35EC model)
- Screwdriver (usually a Philips head for your TB35EC)
- Work gloves (for protection)
- Eye protection (safety glasses or goggles)
Discharge the Mower's Deck
Before you begin changing the string, it's essential to relieve any built-up pressure in the mower's deck. Follow these steps to ensure your safety:
- Set the mower's cutting deck height to its lowest setting.
- Deputize your helper (if you have one; it's best to have an extra pair of hands here) to press and hold down the bail lever while you pull the drive cable.
- Pull the drive cable slowly and steadily until the mower's blade engages and spins freely.
- Carefully release the cable, and degas the mower by opening the fuel cap or deflector shield and pressing the primer bulb 6-8 times.
Removing the Old String
Now that your mower is ready for action, it's time to remove the old string. Follow these simple steps for a hassle-free process:
Access the String Trimmer Head
Before attempting to remove the old string, you'll need to access the trimmer head. Here's how:
- Remove the engine cover on your mower. Usually, it's secured by a single screw.
- Underneath, you'll see the string trimmer head – your target for this task.
Follow the String and Remove It
Once you have access to the trimmer head, it's time to remove the old string. Proceed with the following steps:
- Trace the string from the trimmer head, following it as it winds around and feeds back into the head.
- Carefully pull the string out, unwinding it from the head. If the string is cut, you may need to use a screwdriver or a pair of pliers to help extract it. Be careful not to damage the head or the string itself.
Replacing the String
Now that your mower's trimmer head is clean and free of old string, it's time to install the new one. Let's get started!
Determine the Correct String Length
Before you install the new string, ensure you have the right length. The recommended length for your Troy-Bilt TB35EC is 760 feet. Once you've measured and cut your string to the proper length, you're ready for installation.
Install the New String
With the old string removed and the new string measured and ready, it's finally time to replace the string on your mower. Here's how you do it:
- Feed one end of the new string through the hole in the trimmer head that corresponds to the exit point of the old string (usually the bottom hole).
- Pull the string through the hole and out the opposite side of the trimmer head. You should now have a loop of string hanging out.
- Carefully wind the new string around the trimmer head spindle, ensuring that the windings are tight, neat, and evenly spaced. Aim for a figure-8 pattern to ensure optimal performance.
- Leave a small loop at the end of the string – this will serve as the feed end and allow the string to easily pay out as it's needed.
- Once you've finished winding the string, trim the feed end to your desired length (usually around 10-12 inches).
- pull the other end of the string back through its hole and out of the trimmer head, leaving some extra string for trimming later.
- Reassemble the mower and engine cover, ensuring everything is securely fastened.
Remember to test your mower's cutting prowess once you've replaced the string. Start with a low cutting height and gradually move to higher settings to ensure the string is feeding correctly. If everything checks out, you're good to go! Keep an eye on your string length, and don't forget to replace it as needed to maintain your lawn's pristine appearance.
Now that you've mastered the art of changing the string on your Troy-Bilt TB35EC, you're ready to tackle any lawn care challenge that comes your way. Happy mowing, and may your edges always be perfectly trim and neat!