Troy Bilt TB35EC String Replacement: Step-by-Step
If you're the proud owner of a Troy-Bilt TB35EC string trimmer, you know how efficient it is at keeping your lawn neat and tidy. However, with regular use, the trimmer's string may become worn out or damaged, necessitating a change. Don't worry, changing the string on your TB35EC is a straightforward task that you can accomplish with ease. In this comprehensive guide, we'll walk you through the process step-by-step, ensuring your trimmer stays in top condition.
The first thing to understand is that the TB35EC uses a single-line feed head, which means the string is fed out from the spool one at a time. Here's what you'll need to change the string: a new spool of trimmer line ( asegure it's compatible with your model), a pair of scissors, and around 15 minutes of your time. Let's dive into the process.
Preparation: Unwinding the Old String
Before you can install a new string, you'll need to remove the old one. Start by ensuring your trimmer is unplugged from any power source to prevent accidental startup. Then, locate the trimmer head on the bottom of the trimmer shaft. You'll see two small holes on either side of the head, which are used to release the locking mechanism.
Using a screwdriver or a coin, press and hold the tabs in the holes. While keeping the tabs pressed, rotate the trimmer head counterclockwise to release the old string. You may need to use some force, as the head may be tight. Once the head is loose, pull out the old string and discard it.
Understanding Your Trimmer's Spools
Your TB35EC trimmer comes with a semi-automatic bump-feed head, which means the line is automatically fed out when you bump the head on the ground. The spool inside the head holds the trimmer line and ensures a consistent supply as you use it. Before inserting a new spool, let's understand the different parts of the spool:
- Spool Core: The central part of the spool where the string is wound.
- String: The cutting line that unwinds from the spool as you use your trimmer.
- Spool Flanges: The outer sides of the spool that help keep the string wound neatly.
Now that you're familiar with the spool's components, let's move on to inserting a new spool into your trimmer head.
Installing the New Spool
First, measure out about 10 feet of your new trimmer line. This length is usually sufficient for your TB35EC, but you may need to adjust it depending on the specific spool you're using. Once you have the right length, insert one end of the line into the small hole in the center of the spool. Wind the line around the spool, ensuring you wind it in the same direction as the arrows indicated on the spool.
After you've wound the line around the spool, leave an equal length of line on both sides of the spool - about 4 to 6 inches on each side. This will ensure your trimmer has an adequate supply of line when you need it. Once you've left the desired length, cut the remaining line so that it's flush with the outside of the spool flanges. This will help prevent the line from unraveling during installation.
Refitting the Trimmer Head
Now that you have your new spool ready, it's time to refit the trimmer head onto your TB35EC. First, insert the spool into the trimmer head, ensuring the arrow on the spool points in the same direction as the arrow on the head. This is crucial for the bump-feed mechanism to work correctly.
Next, insert the assembled trimmer head and spool back into the trimmer shaft. You'll feel the head click into place as it locks. Once it's locked, you're ready to test your new string.
Testing Your New String
To test the new string, firmly tap the bottom of the trimmer head on the ground. This action should release a short length of string from the spool. If the string isn't feeding out, check that you've wound the line in the correct direction and that the arrow on the spool aligns with the arrow on the head. If everything is correct, gently tap the head on the ground again until the string feeds out.
Once the string is feeding correctly, your Troy-Bilt TB35EC is ready to tackle any trimming tasks you throw at it. It's a good idea to periodically check your string length to ensure it's trimming efficiently. If the line is too short, tap the head on the ground to feed out more line. If the line is too long, you can cut it with scissors to the desired length.
Changing the string on your TB35EC is a simple process that ensures your trimmer stays in peak condition. Regularly changing the string not only improves your trimmer's performance but also extends its lifespan. So, grab your new spool and follow these steps the next time your string needs a change. Happy trimming!