how to restring a black and decker weed eater

**Restring Black & Decker Weed Eater: Step-by-Step Guide**

By Steven Robinson
AD

Spring has sprung, and that means it's time to start thinking about maintaining your outdoor power equipment. One essential tool to tackle during this season is your Black and Decker weed eater. Regular maintenance, including restringing, ensures optimal performance and longevity. Let's delve into the details of how to restring a Black and Decker weed eater, making your yard work more efficient and enjoyable.

Before we dive into the process, it's crucial to gather all necessary tools and materials. You will need a new weed eater line, a pair of scissors, and airimhole. The line should match the specifications of your original line, which you can usually find in the user manual or by contacting Black and Decker's customer support.

Understanding Your Black and Decker Weed Eater

First, let's familiarize ourselves with the basic components of your Black and Decker weed eater. The trimmer head is where the line is housed and fed from. It's crucial to recognize that Black and Decker uses a bump feed system, which means the line advances by bumping the trimmer head on the ground.

AD
Restring Spool for Black & Decker Trimmer / Edger
Restring Spool for Black & Decker Trimmer / Edger
ECHO weedwacker relined in less than 1 minute
ECHO weedwacker relined in less than 1 minute
Black & Decker Electric String Trimmer Spool Line Replace Rewind
Black & Decker Electric String Trimmer Spool Line Replace Rewind

Another essential aspect to understand is the direction of the line. Most Black and Decker weed eaters use a clockwise rotating line. This means the line is fed out from the top of the trimmer head. Knowing this will help you restring your tool correctly to maximize its efficiency.

Preparing for Restringing

Before you begin the restringing process, ensure your Black and Decker weed eater is unplugged and cool to the touch. This safety precaution is essential to prevent any potential burns or electrocution.

The Secret To Re-stringing A Weedeater In Seconds
The Secret To Re-stringing A Weedeater In Seconds

Next, remove the existing line from the trimmer head. Most Black and Decker models have a small knob or release button that allows you to disassemble the head. Follow the specific instructions in your user manual to unlock and remove the head, then carefully extract the old line.

Inserting the New Line

With the old line removed, it's time to insert the new one. Start with an appropriate length of line, usually around 10 to 12 feet, measured from the center of the spool. Cut the line to this length using a pair of scissors, ensuring a clean cut to minimize any rough edges.

AD

Thread the line through the hole in the center of the spool, leaving a small tail on one side. This tail will help you see which direction to wind the line and ensure it feeds correctly from the trimmer head.

Winding the Line onto the Spool

To wind the line onto the spool, hold the tail end of the line securely with your fingers. Begin winding the line around the spool in a clockwise direction, keeping the line as close to the center of the spool as possible.

It's essential to maintain consistent and equal spacing between the layers of line as you wind. This ensures the line feeds evenly and reduces the likelihood of overloading or binding the trimmer head. Continue winding until the entire 10 to 12 feet of line is used, with only a small amount of line (around 6 to 8 inches) left over to initiate the bump feeding process.

AD

Airing the Line

Once the line is fully wound, it's time to "air" it. This process helps maintain the line's natural curve, which is crucial for proper feeding and efficient functioning. To air the line, lay the spool flat on a smooth surface and allow the line to unwind freely for a few seconds. The line should curl naturally into a spiral shape. If it doesn't, you can gently help it along with your fingers.

After the line has been aired, carefully rewind it back onto the spool in the same direction, ensuring it maintains its natural curve. The line should now be ready for installation back into your Black and Decker weed eater.

Installing the Trimmer Head

With the new line properly wound and aired, it's time to reinstall the trimmer head onto your weed eater. Ensure the line is correctly threaded through the hole in the center of the spool, with the tail end sticking out. The line should now be ready to be fed through the trimmer head's exit hole.

AD

Feed the line through the trimmer head's exit hole, allowing approximately 6 to 8 inches to hang freely at the end. Take care not to allow any excess line to become trapped in the trimmer head mechanism. Once the line is fed through, carefully reassemble the trimmer head according to the specific instructions in your user manual. Ensure the head is properly locked and secured before continuing.

Testing and Final Adjustments

Before you begin using your newly restrung Black and Decker weed eater, it's a good idea to test the line to ensure it feeds correctly. Gently bump the trimmer head on the ground to initiate the line's feed. The line should release smoothly and evenly, allowing you to trim with confidence.

If the line doesn't feed as expected, double-check that you've wound and installed it correctly. If necessary, make any necessary adjustments and test the line again. Once the line is feeding correctly, you're ready to tackle those weeds with renewed enthusiasm.

Now that you've successfully restrung your Black and Decker weed eater, you can expect improved performance and longevity from your tool. Regular restringing is an essential aspect of maintaining your outdoor power equipment, so keep this guide handy for future reference. Happy trimming!

AD