how to restring a weed eater black and decker

How to Restring a Black & Decker Weed Eater

By Amanda Walker
AD

Attention all Black+Decker weed eater enthusiasts! Ever wondered how to give your string trimmer a new lease on life with a simple restring? You're in the right place. Let's dive into the world of DIY maintenance and learn how to restring a weed eater like a pro.

Restringing your Black+Decker weed eater is a quick, easy, and rewarding process that can extend the life of your tool. Plus, it's an excellent way to save money and boost yourDIY skills. So, grab your new spool of trimmer line, and let's get started!

Understanding Your Black+Decker Weed Eater

Before we dive into the restringing process, let's quickly discuss the types of Black+Decker string trimmers. Most Black+Decker weed eaters use either a automatic feed head or a fixed head.

AD
Restring Spool for Black & Decker Trimmer / Edger
Restring Spool for Black & Decker Trimmer / Edger
How to fix weed eater starter recoil spring & pull string.
How to fix weed eater starter recoil spring & pull string.
The Secret To Re-stringing A Weedeater In Seconds
The Secret To Re-stringing A Weedeater In Seconds

The automatic feed head features a bump-feed system, which allows you to feed more line as you need it simply by tapping the head on the ground. The fixed head, on the other hand, requires you to manually adjust the line each time you need more.

Gather Your Tools

Before you begin, ensure you have the following tools on hand:

Weedeater starts but dies. Easy quick fix.
Weedeater starts but dies. Easy quick fix.
  • New spool of compatible trimmer line
  • razor blade or utility knife
  • Screwdriver (Philips or flathead, depending on your model)

Measure your new line to ensure it's compatible with your Black+Decker weed eater. Most models use standard 0.065-inch or 0.080-inch lines.

Dismantle the Head

First, make sure your weed eater is turned off and cooled down. Then, remove the guard and disconnect the head from the shaft by turning it counterclockwise. Use your screwdriver to remove any retaining screws.

AD

Remove the spool by pulling it out of the head. For automatic feed heads, you'll also need to remove the lockout piece to prevent the line from feeding while you restring.

Restring Your Black+Decker Weed Eater

Now that you've got your spool out, it's time to restring your Black+Decker weed eater. Here's a step-by-step guide for both automatic and fixed heads:

Automatic Feed Head

Refill your spool by winding the line clockwise around the spool, following the arrow indicated on the spool. Leave enough line (around 6-10 inches) hanging off the edge to feed through the head.

AD

Reassemble the head by placing the spool back in, ensuring the line feeds through the head correctly. Replace the lockout piece and secure the head back onto the shaft. Cut the excess line with your razor blade or utility knife, leaving about 8-12 inches of working line for each side.

Fixed Head

Load your line by inserting one end of the line into the hole on the side of the spool. Wind the line clockwise around the spool, leaving about 6-10 inches of line hanging off the edge.

Thread the line through the eyelet on the spool and through the hole in the fixed head. Pull the line through, leaving an equal length on both sides (around 8-12 inches). Cut any excess line with your razor blade or utility knife.

AD

Finally, reassemble the head by placing the spool back in and securing it onto the shaft. Put the guard back on, and you're ready to tackle those weeds!

Pro Tips for Maintaining Your Weed Eater

Congratulations! You've successfully restrung your Black+Decker weed eater. Now, let's discuss some tips to keep your tool in tip-top shape:

Proper Storage

When you're done using your weed eater, make sure to clean it and store it properly. Keep it in a dry place, away from direct sunlight and extreme temperatures. Also, coil excess line through the head to prevent kinking or breakage.

Additionally, avoid storing your weed eater with the line completely loaded onto the spool. This can cause excess tension, leading to line breakage or damage to the head.

Regular Cleaning

After each use, clean your weed eater by wiping it down with a damp cloth. Remove any debris or grass clippings that may have built up around the head and spool. This helps prevent buildup and ensures your tool runs smoothly.

From time to time, disassemble the head and clean the inner workings with soapy water and a soft brush. Make sure to dry all components thoroughly before reassembling and storing.

And there you have it – the ultimate guide to restringing your Black+Decker weed eater! With this newfound knowledge, you're well on your way to becoming a DIY gardening expert. Happy trimming, and don't forget to stay safe out there!

AD