How to Replace Pull Cord on Stihl Blower
Tackling a broken pull cord on your Stihl blower might seem daunting, but with the right steps, it can be a straightforward DIY task. In this guide, we'll walk you through the process of replacing your Stihl blower's pull cord, ensuring your tool remains reliable and ready for your landscaping needs.
Before we dive into the process, ensure you have the necessary tools and parts on hand. You'll need a new Stihl blower pull cord, a flathead screwdriver, a Phillips screwdriver, and a pair of pliers. It's also a good idea to have your Stihl blower's owner's manual nearby, as some models may have slight variations in their assembly.
The Pre-Repair Check
Before starting any repairs, it's crucial to ensure your blower is safety-consciousness. Begin by unplugging the tool from any power sources and lay it down on a flat, well-lit surface. This will give you plenty of space to work and minimize the risk of injury.
Next, inspect the pull cord. Sometimes, the issue might not be the cord itself but the bracket that holds the cord in place. If the bracket is bent or broken, replacing it might solve your problem without needing to change the cord.
Identifying the Cord Type
Stihl blowers use two types of pull cords - the standard cotton cord and the high-performance center-pull cord. Before purchasing a replacement, identify which type your blower uses. The easiest way to do this is by looking at the pull cord's end. If it has a spring-loaded mechanism, it's a center-pull cord. If it's a simple cotton cord, it's the standard type.
Obtain the correct replacement cord for your Stihl blower by checking your owner's manual or visiting Stihl's official website. Using the wrong cord can lead to further damage or ineffective operation of your blower.
Gathering Your Tools
Now that you've identified the correct replacement cord, gather your tools. As mentioned earlier, you'll need a flathead screwdriver, a Phillips screwdriver, and a pair of pliers. For added convenience, have some rags or paper towels nearby to wipe off any debris or grease that might accumulate during the repair process.
Lastly, ensure your workspace is clean and well-organized. Having a clutter-free working area will save you time and prevent unnecessary frustrations when replacing your Stihl blower pull cord.
Dismantling the Blower
With everything in place, it's time to dismantle your Stihl blower. Begin by removing the blower tube. On most models, this involves unscrewing or unlatching the tube from the engine housing. Be cautious not to lose any small parts during this process.
The next step is to access the pull cord housing. This is usually found in the lower left-hand corner of the engine housing when viewed from the rear. On some models, you may need to remove the engine cover to expose the housing. Use your Phillips screwdriver to remove any screws securing the cover in place.
Removing the Old Cord
Once you've exposed the pull cord housing, use your flathead screwdriver to pry off the plastic cover. Underneath, you'll find the housing that holds the pull cord in place. Use your pliers to gently pull the old cord out of the housing. If the cord is stuck or broken, you might need to use a pair of needle-nose pliers to carefully extract the remaining cord from the housing.
After removing the old cord, clean the housing thoroughly to remove any debris or residue. This will ensure a smooth installation for your new pull cord and prevent unwanted obstructions during operation.
Installing the New Cord
Begin by feeding the new pull cord into the housing, ensuring the looped end is inserted first. On a center-pull cord, the spring-loaded mechanism should be facing outwards. On the standard cotton cord, the loop should be inserted first, with the rest of the cord following smoothly behind.
Next, route the cord along the prescribed path, following the existing cord's trail. Typically, the cord will follow a path from the housing, along the blower's body, and down to the ergonomic loop handle. Ensure the cord doesn't snag on any sharp edges or obstructions, as this can lead to premature cord failure.
Securing the New Cord
With the new cord routed correctly, it's time to secure it in place. Begin by looping the cord around the ergonomic handle. Make sure the loop is large enough to easily insert your finger, as a too-tight loop can cause discomfort during use.
Once the loop is secured, pull on the cord gently to tension it. Verify that the cord moves freely and doesn't become snagged at any point during the pull. If the cord feels taught or catches, there may be a kink or obstruction in the cord's path, and you'll need to adjust it accordingly.
Reassembling Your Stihl Blower
With the new pull cord successfully installed, it's time to reassemble your Stihl blower. Begin by replacing the plastic cover over the pull cord housing, ensuring it clicks into place correctly.
Next, reattach the engine cover, using your Phillips screwdriver to secure the screws firmly back into place. Be careful not to overtighten the screws, as this can cause damage to the cover or surrounding components.
Reattaching the Blower Tube
With the engine housing reassembled, it's time to reattach the blower tube. Ensure it's securely fastened to the engine housing, and the connection is free from any potential obstructions.
Finally, give your Stihl blower a gentle pull on the cord to ensure the new pull cord is working correctly. If everything is functioning properly, your blower is ready for its next task.
And there you have it - a comprehensive guide to replacing your Stihl blower's pull cord. With the right tools, knowledge, and a touch of patience, you'll have your blower back in top shape in no time. Happy blowing!