how to replace a pull cord on a stihl blower

Step-by-Step Guide: Replacing a Pull Cord on a Stihl Blower

By Daniel Smith
AD

If your STIHL blower has seen better days and its starter cord has frayed beyond repair, don't despair. Replacing a pull cord on a STIHL blower is a manageable task that you can tackle with the right tools and a step-by-step guide. This article will walk you through the process, ensuring your blower is back in action in no time. Let's dive in.

Before we start, gather your materials: a new pull cord, a flathead screwdriver, a pair of pliers, a socket wrench, and safety glasses. Always prioritize safety when dealing with power tools. Now, let's get into the nitty-gritty of replacing that pull cord.

Disassembling the Blower

The first step is to disassemble your STIHL blower. It might seem daunting, but you don't need any special skills. Just follow these steps carefully:

AD
replacing the starter cord on a Stihl gas blower
replacing the starter cord on a Stihl gas blower
HOW TO REPLACE PULL CORD STIHL BLOWER
HOW TO REPLACE PULL CORD STIHL BLOWER
How to Replace the Pull Cord on a Stihl KM 56 RC Trimmer
How to Replace the Pull Cord on a Stihl KM 56 RC Trimmer

1. Remove the intake cover: Use your flathead screwdriver to pry off the three intake cover screws. Set them aside, and carefully lift off the cover.

2. Take off the starter housing: Next, unscrew the starter housing using your socket wrench. You may need to hold the blower upside down for better leverage. Once the screws are loose, gently pull the housing off.

How To Replace A Lawn Mower Starter Cord
How To Replace A Lawn Mower Starter Cord
How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com

Replacing the Pulley

Now that you've exposed the pulley, it's time to swap it out.

1. Remove the old pulley: On the pulley, you'll find two small pins. Use your pliers to carefully push the pins out. They might require some force, so be patient and gentle.

AD

2. Slide the new pulley onto the crankshaft: Ensure the new pulley faces the correct direction. It should align with the cord attachment point on the starter housing. With a bit of force, slide it onto the crankshaft.**

Installing the New Pull Cord

With the new pulley in place, it's time to install the new pull cord.

1. Thread the cord through the pulley: Make a small hole in the new pulley. Thread the end of the new pull cord through this hole, Knot it to prevent it from slipping out. This will be your new starting point.

AD

2. Attach the cord to the blower's starter mechanism: Feed the cord back through the blower's body, ensuring it's properly aligned with the pulley. Once you've done that, attach the cord to the blower's starter mechanism. You might need to refer to your blower's manual for the specific method. **

Reassembling Your STIHL Blower

You've done the heavy lifting. Now, it's time to put everything back together.

1. Reattach the starter housing: Apply a small amount of grease to the starter housing's central shaft. This will ensure smooth operation. Reattach the starter housing and secure it with the screws you removed earlier.

AD

2. Replace the intake cover: With the starter housing securely in place, it's time to put on the intake cover. Align the cover with the blower's body and secure it with the three screws you removed earlier.

Congratulations! You've successfully replaced the pull cord on your STIHL blower. Regularly maintaining your tools not only extends their lifespan but also ensures they're ready to go when you need them. So, the next time you need to tidy up your yard, you can count on your STIHL blower to power through the task. Happy blowing!

AD