how to replace lawn moer pull cord

Quick Fix: How to Replace Lawn Mower Pull Cord

By Matthew Hernandez
AD

If your lawn mower's pull cord has seen better days and is showing signs of wear, it's time for a replacement. Replacing a lawn mower pull cord is not only necessary for the machine's optimal performance but also a safety measure to prevent accidents. This comprehensive guide will walk you through the process, ensuring you have all the information you need to complete this task safely and efficiently.

Before we dive into the step-by-step process, let's ensure you have the right tools and materials. You'll need a new pull cord, a screwdriver, needle-nose pliers, and optionally, a socket wrench. It's also crucial to have a lawn mower that's compatible with the new cord. Always check your mower's manual to ensure compatibility.

Understanding Your Lawn Mower's Pull Cord

To replace the pull cord, you need to understand how it's connected to your lawn mower. The cord is primarily made of nylon and is attached to a pulley system linked to the mower's crankshaft. When you tug the cord, it engages the pulley system, which in turn spins the crankshaft, starting the mower's engine.

AD
How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
How To Replace A Lawn Mower Starter Cord
How To Replace A Lawn Mower Starter Cord
DIY Toro Pull Cord Repair – Easy Step-by-Step Instructions
DIY Toro Pull Cord Repair – Easy Step-by-Step Instructions

The cord is usually secured to a handle attached to the mower's engine. The handle, or ratchet, contains a pulley system and is connected to the engine via a crankshaft pulley. Understanding this mechanism will help you in replacing the cord correctly.

Preparing Your Lawn Mower for Cord Replacement

Before you begin, make sure your lawn mower is cool and has no gasoline in the cylinder. Turn off the mower, remove the spark plug wire, and let the mower rest for a few minutes to ensure it's cool. Then, tip the mower on its side to drain any remaining gas from the cylinder.

How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
How to Replace a Pull Cord on Lawn Mower - A beginners guide | Lawnmowerfixed.com
The Best Method For Replacing The Pull Cord On Your Lawn Mower - House Digest
The Best Method For Replacing The Pull Cord On Your Lawn Mower - House Digest

Next, use a screwdriver to remove the handle from the mower. If your mower has a vent shield that obstructs access to the cord, you may need to remove it using a socket wrench.

Removing the Old Pull Cord

With the handle removed, you should now see the ends of the pull cord. Use needle-nose pliers to pull the ends of the cord out of their housing. You might need to gently pry the end of the cord out with the pliers if it's firmly seated.

AD

Once you've removed the ends, use the pliers to pull the cord through the housing until it's completely removed. Make sure to keep the old cord, as it will serve as a guide for installing the new one.

Installing the New Pull Cord

Now that the old cord is out, it's time to install the new one. Start by comparing the old and new cords to ensure they're identical in length and construction. The new cord should be exactly the same as the old one in every way.

Begin threading the new cord through the handle in the same direction as the old cord was removed. The eyelet on the end of the new cord should be facing the correct way to properly engage the pulley system. Make sure the cord's direction is correct to align with the mower's ratchet mechanism.

AD

Securing the New Pull Cord

Once you've threaded the new cord through the handle, you'll need to secure it in place. Pull about 6 to 8 inches of cord through the handle, then wrap the excess cord around the reel inside the handle several times. The cord should be wrapped snugly but not overly tight.

Now, use the needle-nose pliers to pull the looped cord back through the handle, securing it in place. This will prevent the cord from unraveling and ensure it's properly secured. Replace the handle onto the mower and test the pull cord by tugging gently to ensure it's engaging the pulley system correctly.

Fine-Tuning Your Lawn Mower's Pull Cord

After replacing the handle, you might need to adjust the cord's length. The ideal length for a pull cord is about 12 to 18 inches. If the cord is too long, wrap the excess cord around the reel inside the handle a few more times. If it's too short, you'll need to replace the cord again, ensuring it's the correct length.

AD

Once you're satisfied with the length of the cord, you can replace the vent shield (if you removed it) and your lawn mower is ready to use. Always ensure you're using the correct type of fuel and maintaining your mower regularly to prevent future issues with the pull cord.

That's it! You've successfully replaced your lawn mower's pull cord. Regular maintenance, including cord replacement, will ensure your lawn mower continues to run smoothly and safely. If you ever find yourself in a pinch and need to start your mower with a pull cord, you'll know exactly how to do it the right way.

AD