Step-by-Step: Replace Pull Cord on Lawn Mower
Nothing can spoil your weekend more than realizing that your lawn mower, ready for action in the garage, has a pull cord that has seen its last pull. Replacing a pull cord on a lawn mower is not a daunting task. With the right tools and some patient fiddling, you can have your mower back in action in no time.
Before you start, ensure you have the right replacement pull cord and understand that the process may vary slightly depending on your lawn mower's make and model. Always consult your user manual if available. Here's a step-by-step guide to help you navigate through this process smoothly.
Gathering Tools and Replacement Cord
Before you dive into the process, ensure you have all the necessary tools and parts. You will need:
- A new pull cord, ensuring it matches the original in size and type (nylon or twisted cotton).
- A screwdriver (usually Phillips for most lawn mowers).
- Needle-nose pliers.
- Wire cutters or scissors.
- Rubber gloves (optional, for protecting your hands from debris).
Once you have all the required tools and parts, it's time to begin the process.
Accessing the Pull Cord Mechanism
The first step is to access the pull cord mechanism. This involves removing the mower's housing, which is usually held in place by a few screws. Here's how to go about it:
- Tilting the mower on its side, carefully remove the spark plug.
- Unscrew the housing or cover that protects the pull cord mechanism. The exact steps for this will depend on your specific mower design.
- If required, disconnect any cables or components connected to the mechanism.
Once the mechanism is exposed, you're ready to remove the old cord.
Removing the Old Pull Cord
With the mechanism exposed, the old pull cord should be easy to remove. Follow these steps:
- Grip the loose end of the pull cord with your pliers.
- Carefully pull the cord out, ensuring you don't damage any internal components.
- Once the cord is completely out, inspect it for any signs of damage that may have caused it to break.
Now that you've removed the old pull cord, it's time to prepare the new one.
Preparing and Installing the New Pull Cord
Before you install the new pull cord, ensure it's clean and free of any debris. Here's how to proceed:
Preparing the New Cord
Before you install the new cord, you need to loop it. This will help you have enough slack to pull the mower's motor. Here's how to loop the cord:
- Insert the end of the cord through the hole in the loop.
- Pull the cord through the loop, forming a knot at the end.
- Pull the cord tight, creating a secure loop.
The loop should be about 2-3 inches in length, depending on your mower's design.
Installing the New Cord
With your new pull cord looped and ready, follow these steps to install it:
- Insert the looped end of the new cord through the hole in the pull cord mechanism. Ensure the loop is facing the right direction according to your mower's design.
- Gently pull the cord out, ensuring the loop remains inside the mechanism.
- Allow some slack (2-3 feet) for easy pulling.
- Reassemble the mower's housing, ensuring everything is properly connected and secured.
- Reinstall the spark plug.
- Rug ruggedly pull the new cord to test its functioning.
And there you have it! Your lawn mower is now ready for another season of keeping your lawn neat and tidy. Regular maintenance checks will ensure your pull cord lasts for a long time."