Easy Steps: How to Replace a Lawnmower Pull Cord
Suffering from a snapped lawnmower pull cord? Don't let this common issue deter you from maintaining your lawn's health. Replacing the pull cord is a straightforward task that requires no professional help. Let's guide you through the process with our simple, step-by-step tutorial.
Before we dive in, ensure you've gathered the necessary tools and materials. You will need a new replacement cord, a flathead screwdriver, penetrating oil, some standard-sized nuts and bolts, and possibly a socket wrench, depending on your mower's make and model.
Understanding Your Lawnmower's Pulley System
Your lawnmower's operation hinges on its pulley system. The pull cord, when tugged, spins a pulley connected to a blade-driving centrifugal clutch. The clutch engages when the pulley spins at sufficient speed, kicked into motion by the pull cord and a starter assembly. Understanding this allows you to approach the replacement process with clarity.
Now, let's understand the two main types of pull cords: the manual and the automatic. The manual system uses an air-filled bulb, whereas the automatic utilizes spring tension. Each has its unique cord replacement process, which we'll discuss in detail below.
Replacing a Cord on a Manual Lawnmower
The manual system is simpler but more demanding bodily-wise. Here's how you proceed:
First, access the pulley and starter mechanism by removing the mower's cover. You might need to unbolt the cover using a flathead screwdriver or a socket wrench, depending on your model. Once off, set it aside, ensuring not to misplace any hardware. Next, remove the retaining nut securing the starter clutch, again using the appropriate tool. Lubricate the nut with penetrating oil before removal if it's stuck. Once loose, unscrew it completely and withdraw the starter clutch assembly.
Replacing a Cord on an Automatic Lawnmower
The automatic system, while physically easier, is a tad trickier. Here's the process:
Remove theBlend the cover as you would on a manual system, usually using a flathead screwdriver or a socket wrench. Once off, examine the starter assembly. This could be held by circlips, bolts, or screws depending on your model. Remove these to free the assembly. Find the return spring, held in place by a bracket. Carefully unhook it from its anchor point, then meticulously release its tension by winding the engine until the spring is fully loose.
The above parts outline the initial steps in cord replacement. The steps below are common to both systems:
Preparing the Replacement Cord
Before installing, prepare your replacement cord. Most come with the cord already threaded through the handle. If not, feed it through until it's through both handles. Now, tie an overhand knot at the very end, ensuring the knot is tight and secure.
Understand that the length of your cord will determine your mower's starting ease. Too short, and you'll struggle; too long, and it'll interfere with your mower's function. Usually, aiming for a length between 20 to 30 inches from the handle to the knot should suffice. However, consult your manufacturer's guidelines for the most accurate measurement.
Threading through the Pulley and Starter Assembly
Now, insert the cord's free end through the hole in the starter pulley. The size of this hole might differ between models, so double-check to ensure you've got the right cord. After threading the pulley, pass the cord through the hole in the starter clutch. You'll likely find the hole easier to access if you first reassemble your starter clutch and reinstall it onto your mower.
Push the cord gently but firmly until the knot at the end presses against the starter clutch. This knot will serve as a stopgap, preventing the cord from slipping back out.
Attaching the Cord to the Reel
In some mowers, the cord threads directly onto the reel. If your model requires this, follow these steps carefully. It's easiest if you've already reattached your starter assembly. Thread the cord through the reel's hole, then pull the cord through until you feel the knot meet the reel, indicating the cord is firmly attached.
Other mowers may use a connecting wire. In these cases, tie another overhand knot at the reel end of your new cord. Next, attach the cord to the connecting wire using a lark's head or rope-bend knot. For future reference, these specific knots can be tricky to tie, so practice them a few times beforehand if needed.
The Final Touches: Reassembling and Test-Running
The cord is now secured. Your final task is to reinstall your mower's cover and reattach any hardware removed earlier. Ensure everything is firmly secured before you test your repair.
After reassembly, give the new pull cord a few gentle tugs. You should feel the mower's engine engaging. If it pulls smoothly and the engine engages correctly, your cord replacement was a success! If not, carefully retrace your steps and ensure all components are securely attached.
Tips for future care: Inspect your pull cord periodically for fraying or splitting. These often occur near the handle and can spell disaster if unnoticed. Similarly, lubricate your cord frequently to extend its lifespan and make pulling easier.
Your new pull cord should now serve you well, saving you both time and money. Happy mowing!