how to replace whirlpool washer lid switch

Easy Steps: Replace Whirlpool Washer Lid Switch

By David King
AD

Is your Whirlpool washer refusing to start due to a faulty lid switch? You're not alone. This is a common issue, but don't worry, it's a relatively easy fix for the savvy DIYer. Let's guide you through the process of replacing your Whirlpool washer lid switch with ease. But first, let's understand what the lid switch does.

The lid switch is a safety mechanism that prevents your washer from operating if the lid is open. When you close the lid, the switch completes an electric circuit, allowing the washer to run. If your washer isn't starting, or it doesn't stop when you open the lid, the lid switch might be the culprit.

Understanding Your Whirlpool Washer's Lid Switch

Before you start, it's crucial to understand that there are two types of lid switches in Whirlpool washers - the ones that are integrated into the lid and those that are separate, mounted on the washer frame. This guide will focus on the latter, which is more common in Whirlpool models.

AD
the lid switch plug is located here or here on the top of the dryer
the lid switch plug is located here or here on the top of the dryer
How to replace a washer Lid Switch - Whirlpool Maytag repair
How to replace a washer Lid Switch - Whirlpool Maytag repair
How to Verify Lid Switch is Faulty And Replace. Model # LSN2000PW3. Whirlpool Washer.
How to Verify Lid Switch is Faulty And Replace. Model # LSN2000PW3. Whirlpool Washer.

Your washer's lid switch is usually located at the front of the washer, near the bottom. It might be behind a small panel, so you might need a screwdriver to remove it. Once you've located the switch, it's time to test it to confirm it's the source of the problem.

Testing the Lid Switch

To test the lid switch, you'll need a multimeter set to the continuity setting. With the washer unplugged, touch one probe to each terminal on the switch. If the switch is working, the multimeter should show continuity (a low resistance reading). If it doesn't, the switch is faulty and needs replacing.

Washing Machine Repair - Replacing the Lid Switch (Whirlpool Part # WP8318084)
Washing Machine Repair - Replacing the Lid Switch (Whirlpool Part # WP8318084)
an appliance with the words will not spin - door switch replacement
an appliance with the words will not spin - door switch replacement

Once you've confirmed the switch is bad, it's time to replace it. The replacement process is straightforward, and with the right tools and a little patience, you can do it yourself.

Replacing the Whirlpool Washer Lid Switch

Before you start, make sure you have a new lid switch, a Philips screwdriver, and a pair of pliers. Also, ensure the washer is unplugged to prevent electric shock. Here's a step-by-step guide to replace the lid switch:

AD

1. Consult your washer's owner's manual to locate the exact placement of the lid switch. Typically, it's situated at the front of the washer, near the bottom, under a small panel.

2. Using a Philips screwdriver, remove the panel covering the switch. You might need to use a putty knife to carefully pry it off.

3. Disconnect the wires from the old switch using your pliers. Be careful not to pull on the wires, as this could cause damage.

AD

4. Remove the old switch by unscrewing it from the washer frame. You might need to use a bit of force to get it out.

5. Position the new switch in the same location and screw it in place. Make sure it's secure, but not overtightened.

6. Reconnect the wires to the new switch, ensuring they match the original configuration.

AD

7. Replace the panel you removed earlier and screw it back into place.

8. Plug the washer back in and test it by closing and opening the lid. If you’ve done everything correctly, the washer should now start and stop as expected.

Safety First: Troubleshooting and DIY Maintenance

Before you start any repair work on your washer, always remember to unplug it from the power source to prevent electrical shock. Also, if at any point you're unsure about the process, it's always best to consult a professional.

Regular maintenance can prevent issues like a faulty lid switch. Make sure to clean your washer regularly, removing any lint or debris from the door seals and drains. Also, check the float switch once a year to ensure it's working properly. This can help prevent water leaks, which can damage your washer and your home.

When to Call a Professional

While replacing a lid switch is a straightforward task, there are times when it's best to call a professional. If your washer is still not working after replacing the lid switch, there might be other issues at play. A professional can diagnose and fix the problem safely and efficiently.

Also, if you're not comfortable performing repairs yourself, it's always best to leave it to the professionals. Trying to fix a washer without the right knowledge or tools can lead to further damage and potential safety hazards.

And there you have it! You've successfully learned how to replace a Whirlpool washer lid switch. Regular maintenance and timely repairs can keep your washer running smoothly for years to come. So, the next time you encounter an issue, don't panic. With the right knowledge and tools, you can tackle it head-on. Happy repairs!

AD