how to attach zipper pull to zipper tape

How to Replace a Zipper Pull: Easy Steps for Zipper Tape

By Emily Thomas
AD

Having a functional zipper pull is vital for the easy opening and closing of your zipper. However, replacing or adding one to an existing zipper tape can seem challenging. This guide will walk you through the process of attaching a zipper pull to your zipper tape, ensuring an optimal and durable outcome.

Before engaging in this repair or adjustment task, ensure the zipper pull you have is compatible with your zipper tape. The best way to do this is by comparing the size of the hole in the pull to the teeth of your zipper. If the pull is too small or too large, it may not attach properly, causing further issues.

Understanding the Tools and Materials Needed

Before starting, gather the necessary tools and materials to ensure a smooth process. Typically, you'll need:

AD
Video: How to Add a Zipper Pull onto Raw Zipper Tape
Video: How to Add a Zipper Pull onto Raw Zipper Tape
How to attach a zipper pull to zipper tape - a step-by-step tutorial 🪡🧵✂️ If like me you looked at the bag of zipper pulls next to the continues roll of zipper tape and thought wtf?! 😂 Then I hope this tutorial helps. I may also do a video version too if that would be helpful 🥰 #sewingtutorial #sewingtipsandtricks #sewingbasics How To Put On A Zipper Pull, Zipper Pulls, Sewing Tutorials, Zipper, Sewing
How to attach a zipper pull to zipper tape - a step-by-step tutorial 🪡🧵✂️ If like me you looked at the bag of zipper pulls next to the continues roll of zipper tape and thought wtf?! 😂 Then I hope this tutorial helps. I may also do a video version too if that would be helpful 🥰 #sewingtutorial #sewingtipsandtricks #sewingbasics How To Put On A Zipper Pull, Zipper Pulls, Sewing Tutorials, Zipper, Sewing
How I add zipper pulls to zipper tape!
How I add zipper pulls to zipper tape!
  • Zipper pull
  • Zipper tape
  • Scissors or wire cutters
  • Needle-nose pliers
  • Super glue or zipper replacement kit

When to Use Scissors or Wire Cutters

For zipper pulls with smaller holes, it's essential to use wire cutters or scissors to carefully trim the outer edges of the hole. This step is necessary to ensure a snug fit onto the zipper tape.

When using wire cutters, be cautious not to cut the teeth of the zipper. Test the fit of the pull after trimming until you achieve a good fit but still maintain the pull's structural integrity.

the text 6 ways to attach zipper pulls onto zipper tape or pre - made zippers / how to put a slider on a zipper
the text 6 ways to attach zipper pulls onto zipper tape or pre - made zippers / how to put a slider on a zipper
a woman's hand holding a zipper with the text how to attach a zipper pull to zipper tape
a woman's hand holding a zipper with the text how to attach a zipper pull to zipper tape

Preparing the Zipper Pull

Before attaching the zipper pull, take time to clean the area where it will be installed. Remove any debris, dirt, or old glue residue that could interfere with the new pull's adhesion.

If you're using a zipper replacement kit, follow the instructions provided, as the process may differ slightly from the one described below.

AD

Attaching the Zipper Pull to the Zipper Tape

With your zipper pull prepared and your zipper tape clean, it's now time to proceed with the attachment process.

Thread the short end of the zipper pull through the hole in the pull and up through the cavity between the two zipper tapes. Make sure to orient the pull correctly as per your requirements (e.g., right side up or down).

Securing the Zipper Pull

Once the pull is in place, you can now secure it using super glue or by following the instructions in your zipper replacement kit. Super glue application involves applying a small amount into the cavity between the two tapes and around the base of the zipper pull.

AD

Allow the glue to cure as per the manufacturer's instructions. For a more robust and durable hold, consider using both super glue and the zipper repair kit for an additional layer of security.

Post-Attachment Care

After attaching the zipper pull, test your zipper to ensure it's functioning correctly. Make multiple passes in both directions to ensure the new pull doesn't interfere with the zipper's operation.

Finally, ensure that you give the glue enough time to cure completely before subjecting the zipper to heavy use. This precautions helps prolong the life of your zipper pull and overall zipper function.

AD

Now that you've successfully attached your zipper pull, remember that regular maintenance, such as gently cleaning and lubricating the zipper, can help prevent future issues. With proper care, your zipper should continue to function well for a long time. Happy zipping!

AD