How to Remove Washing Machine Inlet Filter
Is your washing machine not draining as it should? The issue might be a clogged inlet filter. Here's a step-by-step guide on how to remove and clean your washing machine's inlet filter, ensuring optimal performance and preventing potential damage.
Before you start, gather your tools. You'll need a screwdriver (usually a flathead), a brush for scrubbing, and a towel or rag for catching drips. Let's dive into the process.
Less Common but Essential Prep: Cutting the Water Supply
Before you touch any components, safety first. Locate and turn off both hot and cold water supply taps connected to your washing machine. This prevents water from entering the machine while you're working on it.
Also, unplug your washing machine from the power source to avoid any electrical accidents. Now that you've prepped your machine, it's time to tackle the inlet filter.
Locating and Accessing the Inlet Filter
The inlet filter is typically found at the back of the washing machine, behind the access panel. The location can vary slightly depending on the machine's make and model. Consult your user manual if you're unsure.
Finding the Access Panel
Most washing machines have an access panel at the lower back. This could be a plastic cover secured by screws or a removable panel held in place by clips. Use your screwdriver to unscrew and lift off the panel, or carefully pry off the clip-held panel with a flat tool if needed.
Spotting the Inlet Filter
Once the access panel is removed, you'll see several components. The inlet filter is usually the smallest and located near the water taps. It's typically a small, cylindrical or oval-shaped part with visible water lines or ports. It might be plastic or metallic, and sometimes it's part of the water intake hose itself.
Removing the Inlet Filter
Now that you've located the inlet filter, it's time to remove it. The process can vary slightly depending on the type of filter you have:
Pulling Out a Cylindrical or Oval-Shaped Filter
Many inlet filters are designed to be pulled out with your fingers. Simply grip the filter firmly but gently, and tug it out. You might need to twist it slightly, or try different angles. If it's too tight, use a pair of adjustable pliers to securely grip and remove the filter.
Releasing a Hose-Mounted Filter
Some washing machines integrate the inlet filter into the water intake hose. You'll need to disconnect the hose to remove the filter. Use a pair of pliers to gently squeeze and release the hose clamps. Once loosened, slide the clamp towards the middle of the hose, and pull the hose off the filter.
The inlet filter is now out. Congratulations! However, removing it isn't the end of the process. It's crucial to clean the filter to restore optimal water flow.
Cleaning and Reinstalling the Inlet Filter
Cleaning the inlet filter depends on the type of debris it contains. Here are general cleaning methods:
Removing Hair Clumps
If your filter is predominantly clogged with hair, use a pair of scissors to carefully cut away the hair clumps. Then, use an old toothbrush or a dedicated cleaning brush to scrub away any remaining hair fibers.
Dissolving Calcified Deposits
If your inlet filter has hard water deposits, soak it in a solution of equal parts white vinegar and water for about an hour. This will help dissolve the calcified deposits. Afterwards, scrub the filter with a cleaning brush to remove loosened deposits.
Reinstalling the Clean Filter
Once your inlet filter is clean and free of debris, it's time to reinstall it. If your filter was cylindrical or oval-shaped, simply push it back into place. If it was a hose-mounted filter, slide the hose back over the filter, and secure it with the hose clamp.
azzipeat the process if necessary, and don't forget to plug your washing machine back in and turn on the water supply before you test it with a load. Regularly cleaning your washing machine's inlet filter ensures optimal performance, prevents water flow issues, and extends the life of your machine. Happy washing!