how to remove the agitator from a kenmore washing machine

How to Remove Agitator from Kenmore Washing Machine

By Jessica Young
AD

Is your Kenmore washing machine's agitator impairing its efficiency? Don't let this minor inconvenience disrupt your laundry routine. Learn how to remove the agitator safely and easily with our step-by-step guide. Here's how to perform this quick fix and restore your Kenmore washer to optimal performance.

Before we dive into the process, ensure that your Kenmore washing machine is turned off and unplugged for your safety. Additionally, gather some basic tools, such as a screwdriver that corresponds with your machine's screws, and a flat-bladed tool like a putty knife or a plastic edger.

Identifying and Accessing the Agitator

To access the agitator, you'll need to remove parts of the washing machine. To make the process smoother, understand what the agitator looks like and its location within the machine.

AD
Whirlpool / Kenmore Washer - How to Remove the Outer Case
Whirlpool / Kenmore Washer - How to Remove the Outer Case
How to Take Apart a Kenmore Washing Machine
How to Take Apart a Kenmore Washing Machine
How to Fix a Washing Machine - Here's How to Find the Right Part
How to Fix a Washing Machine - Here's How to Find the Right Part

The agitator is the tall, cone-shaped centerpiece of the washing machine that pulsates water and laundry. It is a crucial component that tosses clothes in a circular motion to clean them. Depending on your Kenmore washer model, the agitator's base might be connected to the transmission shaft or the coupler, which transfers power from the motor to the agitator.

Removing the Washing Machine's Panels

Begin by removing the two panels on the sides of the washing machine's cabinet. Most Kenmore washers have panels that are either screwed on or snap-fit in place. If they're screwed on, use your screwdriver to remove the screws and gently pry off the panels.

How to Take Apart and Clean a Stinky Kenmore (Whirlpool) Top Loading Washer
How to Take Apart and Clean a Stinky Kenmore (Whirlpool) Top Loading Washer
How To Take Apart A Washing Machine - Hunker
How To Take Apart A Washing Machine - Hunker

If your Kenmore washing machine has snap-fit panels, you can use your putty knife or plastic edger to pry them off by carefully inserting it between the panel and the cabinet and gently lifting the panel off. Be cautious not to break or chip the panels as they are reusable.

Accessing the Agitator's Screw

Once the side panels are removed, you will see the agitator's plastic cover. Underneath this cover lies a screw that secures the agitator in place. Use your screwdriver to remove this screw, keeping it in a safe place for when you want to reassemble the washer.

AD

After removing the screw, gently lift the plastic cover off the agitator to expose the base of the agitator and the transmission shaft or coupler it is connected to.

Disconnecting and Removing the Agitator

Before removing the agitator from your Kenmore washing machine, be aware that the agitator might be connected to the transmission shaft or coupler. To disconnect it, you'll need to rotate the agitator and align the holes in the agitator base with the holes in the shaft or coupler.

To do this, you can either rotate the agitator using your hands or use a flat-bladed tool like a putty knife. To rotating, gently push down on the agitator and twist it to align the holes. Once the holes are aligned, insert a pin or a tool into the holes to keep them aligned while you work on removing the agitator.

AD

Removing the Agitator's Set Screw

With the holes aligned, you can now access the set screw that secures the agitator to the shaft or coupler. Using your screwdriver, remove the set screw by turning it counterclockwise until it is completely removed from the agitator.

Make sure to keep the set screw in a secure place as it is necessary for reassembling the washer. Once the set screw is removed, you can now lift the agitator straight up and out of the washer.

Inspecting and Cleaning the Agitator

Now that you have successfully removed the agitator from your Kenmore washing machine, it's time to inspect it for any signs of damage or wear. Check the interior and exterior surfaces for any cracks, chips, or rust.

AD

If you find any issues, consider replacing the agitator with a new one. If not, you can proceed to clean the agitator and other internal components of your Kenmore washer to ensure its optimal performance.

While the agitator is removed, this is an opportune time to inspect and clean the rest of the washing machine's interior. Use a damp cloth to wipe down the transmission shaft, coupler, and other components you have exposed. This will help prevent buildup and keep your Kenmore washer running smoothly.

After cleaning, reinsert the agitator into the washer and follow the steps in reverse to reassemble your Kenmore washing machine. Once everything is back in place, reattach the side panels and plug in your washer. It's ready to go!

Now that you know how to remove and clean the agitator on your Kenmore washing machine, you can maintain its efficiency and reduce the risk of more significant issues. Regularly inspecting and cleaning your washer's components will extend its lifespan and ensure it continues to perform optimally. Happy washing!

AD