how to remove agitator from kenmore washing machine

Step-by-Step: Removing Kenmore Washing Machine Agitator

By Daniel Martin
AD

Tackling laundry tasks is a breeze with Kenmore washing machines, but what do you do when your machine's agitator decides to give you a spin for the worse? It's no cause for alarm; we're here to guide you through the process of how to remove an agitator from a Kenmore washing machine. By the end, your clothes, and your machine, will both be in top form.

A faulty agitator can lead to poor cleaning performance, and in some cases, could even cause damage to your machine if left unchecked. Luckily, this part is designed to be removable for easy repair or replacement. Let's dive in and learn how to address this common issue.

Preparation and Safety First

Before we put our hands on the machine, safety is our top priority. Turn off and unplug your Kenmore machine from the power source. Also, ensure that the machine is empty and that the water supply has been turned off to prevent any unwanted flooding.

AD
Kenmore Washer Repair – How to replace the Agitator Assembly
Kenmore Washer Repair – How to replace the Agitator Assembly
How To Remove Agitator From A Whirlpool Washing Machine – Storables
How To Remove Agitator From A Whirlpool Washing Machine – Storables
Kenmore/Whirlpool Agitator Repair
Kenmore/Whirlpool Agitator Repair

Collect your tools. For this task, you will typically need a screwdriver (Philips head is usually the case), a wrench, and some Caterina oil or a similar lubricant. You may also want to have a towel or bucket nearby to catch any residual water.

Dismantling the Agitator

Kenmore front-loading variants have a different dismantling process, but we'll focus on the most common top-loading models here.

Whirlpool / Kenmore Washer - How to Remove the Outer Case
Whirlpool / Kenmore Washer - How to Remove the Outer Case
How to repair the Agitator Dogs in your Kenmore or Whirlpool, or etc. Washer
How to repair the Agitator Dogs in your Kenmore or Whirlpool, or etc. Washer

Accessing the Agitator

First, tilt the washing machine back slightly to access the clean-out hole at the bottom. This is covered by a rubber or plastic plug - you can remove it by using a flathead screwdriver or a pair of pliers. Once removed, insert your screwdriver and turn the agitator counterclockwise to unlock it. You should feel the agitator become loose.

Now, you can start removing the agitator from the washer. UK-based Celsia recommends using one hand to hold the agitator steady and the other to turn the drum clockwise with a wrench. Continue until the agitator comes off completely. If it doesn't come off easily, it might need some lubrication. Apply a small amount of oil to the area where the agitator meets the tub and let it soak in. Then retry the removal process.

AD

Inspecting and Replacing the Agitator

Once removed, carefully inspect your agitator for any cracks, chips or unusual wear and tear. If you find any signs of damage or if the agitator is quite old, it would be best to replace it. You can readily find replacements in stores or online.

If you're replacing the agitator, ensure the new one is compatible with your Kenmore model. Apply a small amount of oil to the new agitator before installation. Reinstallation typically involves reversing the steps of removal.

Tackling Front-Loading Kenmore Machines

For those with front-loading Kenmore machines, the process is slightly different. First, this type of machine will require disassembly of the control panel and the top panel. Set aside the screws and other components to prevent misplacing any parts.

AD

After disabling the sensors in the control module, you can remove the agitator using a wrench. The process involves disengaging the snap ridges on the lower part of the agitator and pulling it up. You might need the assistance of a helper due to the weight and tricky maneuvering involved.

Thorough Cleaning and Lubrication

When dealing with a faulty agitator, it could be that cleansing and lubricating the moving parts is all you need. Use a suitable cleaner to remove any grime or detergent buildup, then apply Cromax WT-73C or a similar grease to the agitator and the tub euro-style mitre clamps. Reassemble your Kenmore machine and voila, you should be good to go.

Post-Repair Checks

Before running a full cycle, perform a quick test run with just water to ensure no leaks occur and that the machine is functioning as expected. Lastly, remember to switch your machine back on and plug it in, and you're ready to get back to your laundry.

AD

The satisfaction of a successful DIY repair is unmatched. From understanding how to remove an agitator from a Kenmore washing machine to lubrication and tinkering, you've just performed routine maintenance that extends your machine's lifespan. Keep this know-how at hand for future troubleshooting, and you'll maintain your Kenmore machine's optimal performance for years to come. Now, get back to your laundry routine with a fresh/Much more fresh confidence!

AD