how to remove agitator from ge washing machine

How to Safely Remove and Replace an Agitator in Your GE Washing Machine

By Nicole Smith
AD

Are you faced with a wobbly or noisy GE washing machine? The agitator could be the culprit. Removing it for cleaning or repair can seem daunting, but we've simplified the process. Here's a step-by-step guide on how to remove the agitator from your GE washing machine, ensuring your appliance runs smoothly and quietly once again.

Before you start, ensure your washing machine is unplugged and the door is securely closed to prevent water spills. Also, gather your tools - a socket wrench, a screwdriver, and maybe a putty knife. Let's dive right in!

Preparation and Accessing the Agitator

To begin, you'll need to access the agitator. GE washing machines have different models, but the process is generally similar. Here's how:

AD
How to remove the Agitator from Hotpoint/Ge washing machine
How to remove the Agitator from Hotpoint/Ge washing machine
How to Remove the Agitator From a Washing Machine
How to Remove the Agitator From a Washing Machine
How to remove the agitator and basket on a GE washing machine
How to remove the agitator and basket on a GE washing machine

1. Remove the outer agitator: Start by lifting the top lid of your washing machine. Then, using your screwdriver, remove the screws securing the outer agitator cap. Lift it off gently, as it's likely filled with water and detergent residue.

Disconnecting the Hot Water Valve

Before you proceed, you'll need to disconnect the hot water valve to avoid any drips during the process.

Washing Machine Agitator Repair (All Models)
Washing Machine Agitator Repair (All Models)
Replacing GE Washer Agitator
Replacing GE Washer Agitator

1. Locate the hot water connection: Find the flexible water supply hose connected to the back of your washing machine. It's usually on the left side. Follow this hose to where it connects to the hot water valve.

2. Disconnect the hot water valve: Using your putty knife, gently pry off the covering that shielded the clips securing the water supply hose. Then, press the clips on the supply hose to release the hot water valve.

AD

Removing the Upper and Lower Agitator Assembly

Now that you've disconnected the hot water valve, you can safely proceed to remove the agitator.

1. Remove the upper agitator assembly: Look for a large nut at the top of the agitator. This can be tightened or loosened using a socket wrench. Turn the nut counterclockwise to remove it. Once loosened, you can pull it straight up to remove the upper agitator assembly.

2. Remove the lower agitator assembly: Find the center post that the upper part of the agitator was attached to. You'll see a large bolt or nut at the base. Use your socket wrench to turn it counterclockwise. With the bolt or nut removed, you can now pull out the lower agitator assembly.

AD

Cleaning and Trouble-Shooting the Agitator

With the agitator removed, you can now clean it and check for any issues causing wobbling or noise.

The most common problems are worn-out gears, debris caught between the agitator and the washer drum, or loose mounting bolts. During cleaning, you may find hot water residue, lint, or small coins stuck in the gears. Removing these should significantly reduce noise and improve functioning.

Cleaning the Agitator

To clean the agitator, you can use soap and warm water, or even a specialized machine cleaning kit. Ensure you soak and clean both the inner and outer parts thoroughly.

AD

After cleaning, use a shop vacuum to dry any moisture left. This will prevent dirt from resettling in and ensure the agitator is ready for reinstallation.

Reinstalling the Agitator

Now that your agitator is clean, follow the same steps you took when removing it, but in reverse order. Make sure all bolts and nuts are securely tightened to prevent wobbling and ensure proper functioning.

Reconnect the hot water valve, rinse any spilled residue, and replace the outer agitator cap. Finally, plug in your washing machine, and test it with an empty load to ensure everything is running smoothly.

Regular maintenance and cleaning of the agitator are key to prolonging the lifespan of your GE washing machine. If you find that the problem persists, it might be time to call a professional appliance repair service. Keep your washer running smoothly and silently with routine care!

AD