How to Remove a Commercial Door Handle
Imagine you've purchased a new door handle to upgrade your commercial space, but the old one hasn't budged even after a few tries. Removing a commercial door handle might seem daunting, but with the right steps and tools, you'll be well on your way to freshening up your entryway. Let's break down the process into manageable tasks, ensuring a safe and successful removal.
Before you start, gather your tools. You'll typically need a screwdriver, a chisel, a hammer, a pry bar, and possibly a utility knife. It's also a good idea to have some safety glasses and gloves on hand to protect yourself during the process. Now, let's dive into the steps.
Understanding Your Door Handle's Mechanism
Before you start dismantling, it's crucial to understand how your door handle is secured. Commercial door handles usually have screws or bolts that hold them in place. Some may have escort ions or simple pins that need to be removed. Familiarizing yourself with this mechanism will help prevent damage to the door itself.
If the handle is held in place by screws, they could be hidden beneath decorative covers. Use a utility knife to gently cut away any covering material, revealing the screws. Be careful not to damage the door's finish. Some handles may also have set screws that secure the handle's mounting screw. These can be found in the center of the handle and should be removed first.
Removing Set Screws
Set screws are small and often located in the center of the handle or near its base. Use a small screwdriver to turn them counterclockwise, backing them out until they're loose. Some set screws may be Allen-style, requiring an Allen wrench for removal. Once all set screws are removed, the handle should be free to move but may still be held in place by the main mounting screw.
If your handle has a lock or a latch, there may also be a set screw securing the handle's part of the mechanism. Again, back this screw out counterclockwise until it's completely removed. It's a good idea to keep track of these small screws as you remove them. A small container or magnet can be helpful for this.
Unscrewing the Handle
Now that the set screws are removed, you can access the main mounting screw. This screw often sticks out slightly from the door handle's center. Use your screwdriver to turn this screw counterclockwise until it's completely removed. If the handle is still not budging, don't force it yet.
Instead, use a chisel and hammer to carefully tap around the handle, loosening it from any dried paint, glue, or other debris it may have stuck to over time. Work slowly, being careful not to damage the door. Once the handle is loose, you should be able to pull it off with your hands or use a pry bar for extra leverage, if needed.
Removing the Handle's Collet or Rosette
Some commercial door handles have a decorative collet or rosette around the handle's shaft. If your handle does, you'll need to remove it before proceeding. These decorative elements are usually secured with small screws or sometimes, they slip off once the handle is removed.
If the collet or rosette is screwed onto the handle shaft, use a small screwdriver to back out the screws until they're loose. If it's a tight fit, use a utility knife to carefully cut away any material around the collet, freeing it up.
Removing the Handle's Internal Mechanism
If your door handle has a locking mechanism, you'll need to remove this too. Most internal mechanisms can be removed by unscrewing them or using a flathead screwdriver to pop them out. It's a good idea to take a picture of how the mechanism is arranged before removal, as this will help you reinstall the new one correctly.
Some mechanisms may be secured with separate screws that need to be removed first. Be sure to keep track of these small screws, as they're easy to lose. Once the mechanism is removed, you should be left with just the door knob's shaft protruding from the door.
Removing the Handle's Shaft
The handle's shaft is the part that sticks out of the door and into the door handle's backset. To remove it, you may need to use a longer screwdriver or a specialized tool designed for this purpose. The shaft is usually secured with a setscrew that needs to be backed out.
If the setscrew is impossible to reach or remove, you may need to drill it out. Be extremely careful when drilling, as you don't want to drill all the way through the door. Once the setscrew is removed, the shaft should pull out easily. If it's too tight, use a chisel and hammer to carefully tap it loose.
Congratulations! You've successfully removed your commercial door handle. With a little patience and careful attention, you're ready to install your new one. Don't forget to test fit your new handle before securing it in place to ensure a perfect installation. Happy renovating!