how to remove kwikset lever door handle

"How to Remove Kwikset Lever Door Handle"

By James Thomas
AD

Ever found yourself in a pickle with a stuck or broken Kwikset lever door handle? Fret not, as removing a Kwikset lever door handle is a straightforward task that requires basic tools and know-how. In this guide, we'll walk you through the process step by step, ensuring you're equipped with all the necessary information to tackle this DIY project like a pro.

Before we dive into the nitty-gritty, let's quickly address why you might need to remove a Kwikset lever handle. Perhaps your handle has become damaged, making it difficult to use. Or maybe you're embarking on a home improvement project that requires you to swap out your current hardware for a fresh, new look. Whatever the reason, you're in the right place to learn how to remove a Kwikset lever door handle safely and efficiently.

Understanding Your Kwikset Lever Door Handle

Before you begin, it's essential to identify the type of Kwikset lever handle you have. Kwikset offers various designs and models, but most follow a similar removal process. For this guide, we'll focus on the most common Kwikset lever handles with a set screw.

AD
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to replace door knobs with Kwikset Levers
How to replace door knobs with Kwikset Levers
Contemporary Levers: Cylinder Removal and Replacement
Contemporary Levers: Cylinder Removal and Replacement

Familiarize yourself with the key components of your lever handle. The set screw is a small screw that secures the handle's thumbturn or rosette. To locate it, look for a small hole typically positioned at the top of the thumbturn or on the side of the rosette. Once you've identified the set screw, you're ready to proceed with the removal process.

Gather the Necessary Tools

To remove a Kwikset lever door handle, you'll need a few basic tools. Gather the following items before you begin work:

How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How To Remove A Lever Door Handle Without Screws - Hunker
How To Remove A Lever Door Handle Without Screws - Hunker
  • A Phillips or flathead screwdriver (depending on your handle's set screw type)
  • An Allen wrench (if your handle has an Allen set screw)
  • Pliers or a adjustable wrench (for stubborn set screws)
  • Penetrating oil (optional, for jammed or frozen set screws)

Disconnect the Door Latch

Before removing the lever handle, it's crucial to disconnect the door latch to prevent damaging the mechanism. Here's how:

  1. Close the door and secure it with a towel or piece of cloth to keep it from moving.
  2. Locate the latch assembly on the doorknob side of the door.
  3. Remove the latch assembly by using pliers or an adjustable wrench to turn the latch clockwise until it's fully unscrewed from the door. Carefully lift it out.

Removing the Kwikset Lever Handle

Now that you've disconnected the door latch, you're ready to remove the Kwikset lever handle itself. Follow these steps to complete the process:

AD

Remove the Set Screw

With the latch assembly removed, you should now see the set screw easily. Here's how to undo it:

  1. Using your screwdriver or Allen wrench, firmly grip the set screw and turn it counterclockwise to unscrew it.
  2. If the set screw is jammed or frozen, apply penetrating oil to the screw head, wait a few minutes, and then try to unscrew it again. If it's still resistant, use pliers or an adjustable wrench for extra gripping power.

Remove the Handle and Rosette

Once the set screw is completely removed, follow these steps to take off the lever handle and rosette:

  1. Grasp the thumbturn or rosette and pull it straight out and away from the door. If the handle is stuck, gently tap the outside of the rosette with a soft-faced hammer to loosen it.
  2. With the thumbturn or rosette removed, you should now see the handle's spindle. Most of the time, the handle will slide right off the spindle. If it's tight, gently tap the side of the handle to free it.
  3. Pull the handle off the spindle and set it aside. The lever handle and rosette are now completely removed from the door.

Replacing or Installing a New Handle

With the old Kwikset lever handle removed, you can now replace it with a new one or install a completely different design. Here's how to put your new handle in place:

AD

Install the New Handle's Spindle and Rosette

Before installing the new handle, ensure the spindle and rosette are correctly aligned and seated in the door. Follow these steps:

  1. Carefully insert the new handle's spindle into the hole created by the removal of the old spindle.
  2. Position the new rosette on the opposite side of the door, ensuring it's correctly aligned with the spindle.
  3. Gently push the rosette onto the spindle, ensuring it's securely in place.

Secure the New Handle with the Set Screw

With the new handle's spindle and rosette in place, it's time to secure them using the set screw:

  1. Position the set screw into the hole provided and turn it clockwise using your screwdriver or Allen wrench.
  2. Tighten the set screw firmly, but be careful not to overtighten and damage the handle or strip the set screw.

Congratulations! You've just successfully removed and replaced a Kwikset lever door handle. Now that you're a pro at handling this DIY project, you'll be ready to tackle similar tasks in the future. Happy handle hunting!

AD
AD