How to Remove Kwikset Door Handle with Hidden Screws
Ever found yourself struggling with a Kwikset door handle that just won't budge? It's not your fault; Kwikset is known for their secure, hidden screw design. But fear not, for with the right techniques, you can remove that stubborn handle and replace it with a new one. Let's dive into a step-by-step guide on how to remove a Kwikset door handle with hidden screws.
Before we proceed, remember safety first. Gather your tools - a flathead screwdriver, an Allen wrench (size may vary depending on the Kwikset model), and ideally, a drill for stubborn screws. Also, ensure the door is secured to prevent it from moving during removal.
Understanding Kwikset's Security Feature
Kwikset door handles use an innovative hidden screw design to enhance security. This design makes it harder for would-be intruders to remove the handle, but it also presents a challenge for the average homeowner. Let's explore how this feature works and how to overcome this challenge.
Kwikset's "SmartKey" technology employs a unique, threaded rod that screws into the handle's backset. The rod is secured with a small Allen screw, providing a secure hold. The problem lies in reaching these screws without the proper tools or knowledge. But with a little detectives' work, you'll soon have those hidden screws in plain sight.
Locating the Hidden Screws
First, identify the type of Kwikset lockset you have. Kwikset uses several designs, including satin nickel, polished brass, and lever style. Regardless of the design, the process for finding the hidden screws remains roughly the same.
Start by unscrewing the set screw located on the faceplate or handle. This screw is usually visible and can be removed using a flathead screwdriver. Once removed, you'll see a small hole. Insert your Allen wrench into this hole and turn the handle clockwise to expose the hidden screw. If your Allen wrench doesn't fit, you may need to use a drill to remove the hidden screw.
Removing the Hidden Screws
Once you've located the hidden screws, it's time to remove them. Use your Allen wrench to turn the handle clockwise, which should unscrew the hidden screw. Be patient; this process might require some force, especially if the screws have not been removed in a while.
If the hidden screw is still not budging, it might be stripped or damaged. In this case, you'll need to drill it out. Start by making a small pilot hole in the center of the screw using a small drill bit. Then, use a larger bit to slowly drill out the screw. Be careful not to drill too deeply and damage the handle or the door itself.
Removing the Kwikset Door Handle
Now that you've removed the hidden screws, it's time to remove the Kwikset door handle. This process is much simpler than locating and removing the hidden screws.
First, remove the interior escutcheon, which is the decorative plate covering the Thumbturn. You can do this by using a flathead screwdriver to gently pry off the escutcheon. Once removed, you should see the Thumbturn screw. Remove this screw and pull out the Thumbturn.
Removing the Handle and Latch
With the Thumbturn removed, the handle and latch assembly should come off easily. Pull on the handle while turning it clockwise. If the assembly is still stuck, try wiggling it back and forth until it pops off.
If your Kwikset lockset has a deadbolt, you'll also need to remove the deadbolt assembly. This is done by unscrewing the deadbolt from the strike plate side of the door. Once the deadbolt is removed, you can pull out the assembly from the edge of the door.
Installing the New Handle
With the old handle removed, it's time to install your new Kwikset door handle. The process is essentially the reverse of removal:
- Insert the latch assembly into the mortise in the edge of the door.
- Position the handle on the face of the door and line up the set screw hole.
- Screw in the set screw to secure the handle to the latch.
- Reinstall the Thumbturn and escutcheon.
- If your lockset includes a deadbolt, reinstall the deadbolt assembly.
Congratulations! You've successfully removed and replaced your Kwikset door handle.
Remember, Kwikset's hidden screw design is meant to deter potential intruders, but it can also provide a challenge for homeowners. Always use caution when trying to remove or replace these locksets, and if in doubt, don't hesitate to call a professional locksmith. Happy handling!