how to remove a kwikset lever door handle

Step-by-Step: Remove Kwikset Lever Door Handle

By Nicole Martinez
AD

Ever found yourself in a situation where you need to replace your Kwikset lever door handle, perhaps due to wear and tear, or maybe you're just looking to give your space a fresh look? Removing a Kwikset lever door handle might seem like a daunting task, but with the right steps and a bit of patience, you can get it done without any professional help. Let's dive into a step-by-step guide on how to remove a Kwikset lever door handle.

Before we proceed, ensure you have the necessary tools at hand. You'll need a flathead screwdriver, an adjustable wrench, and a steady hand. Once you've gathered your tools, let's begin.

Preparing the Door

1. **Locate the Screw**: Most Kwikset lever door handles have a small screw on the inner side of the door. This screw secures the lever onto the latch. Using your flathead screwdriver, unscrew this. Be careful not to strip the screw head. If you're having trouble, you can use a bit of WD-40 to loosen it up.

2. **Remove the Rosette**: The rosette is the decorative cover that hides the screw. Once you've removed the screw, gently pull out the rosette. It should come off relatively easily.

Removing the Latch

With the rosette removed, you can now access the latch. Here's how to remove it:

1. **Remove the Set Screw**: Using your flathead screwdriver, remove the set screw on the side of the latch. This screw locks the latch plate into place. Once removed, the latch should be free to move within the door.

2. **Slide Out the Latch**: With the set screw removed, you can now slide out the latch. If it's tight, you can use a thin tool like a flathead screwdriver to carefully tap the latch out. Be gentle to avoid damaging the door.

Disconnecting the Handle from the Door

Now that the latch is out, you can disconnect the handle from the door. Here's how:

1. **Remove the Set Screw on the Handle**: Using your flathead screwdriver, remove the set screw on the side of the lever handle. This screw secures the handle onto the spindle. Once removed, the handle should be free to move.

2. **Remove the Handle**: With the set screw removed, you can now pull off the handle. If it's stuck, gently tap it with a soft mallet to loosen it. Once it's loose, you should be able to pull it off easily.

Removing the Interior Trim

If you're replacing the interior lever with a different style, you might need to remove the interior trim as well. Here's how to do it:

1. **Remove the Screw**: Unscrew the screw at the end of the interior lever. You might need an adjustable wrench to do this, as the screw is often tight.

2. **Remove the Trim**: Once the screw is removed, the trim should come off easily. If it's stuck, gently pull it off. It might take a bit of wiggling, but it should come off cleanly.

Removing the Strike Plate

If your new lever door handle comes with a different strike plate, you might need to remove the old one. Here's how:

1. **Remove the Screws**: Use your screwdriver to remove the screws that hold the strike plate in place. The strike plate is the metal piece on the door jamb that the latch rests against.

2. **Remove the Strike Plate**: Once the screws are removed, the strike plate should come off easily. If it's stuck, you might need to use a bit of force, but be careful not to damage the door jamb.

And there you have it! You've successfully removed your Kwikset lever door handle. With these steps, you're ready to install your new lever door handle. Happy DIYing!

How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to replace door knobs with Kwikset Levers
How to replace door knobs with Kwikset Levers
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How do I remove a Kwikset deadbolt with no screws on the inside plate?
How do I remove a Kwikset deadbolt with no screws on the inside plate?
How To Remove A Lever Door Handle Without Screws - Hunker
How To Remove A Lever Door Handle Without Screws - Hunker
AD