how to remove kwikset door lever

Quickly Remove Kwikset Door Lever: Step-by-Step Guide

By Brian Thomas
AD

Struggling with a flaw door lever? Don't let it hold you back! Removing a Kwikset door lever might seem daunting, but with the right steps, you can do it safely and efficiently. Let's dive into a comprehensive guide to help you remove that Kwikset door lever and restore your door's functionality.

Before we begin, ensure you have the necessary tools: a flathead screwdriver, a Phillips screwdriver, and possibly a drill, depending on your lock's type. Remember, always work carefully and patiently to prevent damage to your door or lock.

Understanding Your Kwikset Lock

The first step to removing your Kwikset door lever is identifying the type of lock you have. Kwikset offers various lock designs, each with its unique removal process. Some Kwikset locks can be removed using a simple screwdriver, while others may require drilling.

AD
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to replace door knobs with Kwikset Levers
How to replace door knobs with Kwikset Levers
Contemporary Levers: Cylinder Removal and Replacement
Contemporary Levers: Cylinder Removal and Replacement

Inspect your lock carefully. If your lock has a small hole or slot on the interior side, you can likely remove it using a flathead or Phillips screwdriver. If there's no hole, you'll need to drill a small pilot hole to start the removal process. Foradded security, Smith & Wesson and Kwikset SmartKey locks should be handled by a professional or according to the manufacturer's instructions.

Removing Simple Kwikset Locks

For Kwikset locks with a visible hole or slot, follow these steps to remove the lever:

How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How do I remove a Kwikset deadbolt with no screws on the inside plate?
How do I remove a Kwikset deadbolt with no screws on the inside plate?
  • Insert the appropriate screwdriver into the hole or slot.
  • Apply gentle but firm pressure and turn the screwdriver counterclockwise.
  • Once the lock mechanism disengages, the lever should twist and lift off easily.
  • Remove the lever from the door. No need to disconnect any wires if your lock is electronic.

Removing Kwikset Locks Without Visible Holes

For locks without a visible hole, drilling a small pilot hole is necessary. Follow these steps carefully:

  1. Gently mark a small 'X' on the interior side of the lock where you'll drill.
  2. Drill a small pilot hole (around 1/16-inch) into the marked area. This hole will serve as a starter for your screwdriver.
  3. Insert the appropriate screwdriver into the pilot hole and follow the steps mentioned earlier to remove the lever.

Removing the Lock Cylinder

If you're replacing your lock entirely or installing a new lock, you'll need to remove the lock cylinder. The process varies depending on your door's material and whether it's predrilled.

AD

For pre-drilled doors, follow these steps to remove the lock cylinder:

  • Using a drill or a screwdriver, remove the screws holding the interior and exterior escutcheons (faceplates) in place.
  • Remove the escutcheons, exposing the lock cylinder.
  • Using the appropriate tool, turn the cylinder counterclockwise to remove it from the door.

Removing the Lock Cylinder from Non-Predrilled Doors

If your door is not predrilled, you'll need to drill holes for the lock cylinder. Follow these steps:

  1. Measure and mark the hole location on both sides of the door, ensuring they align.
  2. Drill a 2 1/8-inch hole through the door using a spade bit. This hole should be concentric with the marked holes.
  3. Insert the lock cylinder's tailpiece through the hole and secure it in place using screws.

That's it! You've now successfully removed your Kwikset door lever and possibly the lock cylinder. If you found this guide helpful, consider sharing it with others who might benefit from your newfound knowledge. Happy DIYing!

AD
AD