how to remove kwikset door knob

How to Remove Kwikset Door Knob: Step-by-Step Guide

By Richard White
AD

Tired of dealing with a faulty or worn-out Kwikset door knob? Removing it for repair or replacement might seem daunting, but with the right steps, you can do it yourself. Let's dive into a comprehensive guide on how to remove a Kwikset door knob.

Before you start, gather your tools and ensure you have enough space to work. You'll need a flathead screwdriver, an adjustable wrench, and maybe some pliers. Also, be patient and careful to avoid damaging your door or the knob.

Preparation and Tools

Gathering the right tools is the first step in removing your Kwikset door knob. Here's what you'll need:

AD
(118) How to Remove the Cylinder from a Kwikset Door knob
(118) How to Remove the Cylinder from a Kwikset Door knob
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How to Fix the Lever that Came Off of Your Kwikset Entry Lock (It Is NOT a Missing Set Screw)
How do I remove a Kwikset deadbolt with no screws on the inside plate?
How do I remove a Kwikset deadbolt with no screws on the inside plate?
  • A flathead screwdriver
  • An adjustable wrench
  • optionally, pliers

Having these tools on hand will make the process much smoother. Now, let's move on to the actual removal process.

Preparing the Inside of Your Door

Start by closing the door and making sure there's nothing blocking the inside mechanism. Remove any valve covers or other decorative elements that might hinder access to the latch assembly. If you're working on a mortise lock, you may also need to remove the faceplate and/or trim.

How to Remove a Doorknob With Hidden Screws | Angi
How to Remove a Doorknob With Hidden Screws | Angi
How to Remove and Replace a Weslock Doorknob
How to Remove and Replace a Weslock Doorknob

Accessing the Latch Assembly

With the inside of your door clear, use a flathead screwdriver to remove the large retaining ring located beneath the knob. This ring secures the outer components to the latch assembly. Once removed, the outer components should slip off easily.

Removing the Door Knob

With the latch assembly exposed, it's time to remove the door knob itself. Kwikset knobs often come with a separate spindle and roses (the decorative outer pieces). Here's how to remove them:

AD

First, use your flathead screwdriver to unlock the door using the button hole on the latch assembly. Don't force the knob. If it's too tight, use some mild lubricant like WD-40 to help loosen it.

Removing the Spindle

The spindle is the central shaft that connects the door knob to the latch assembly. To remove it:

  1. Slide the lock button hole on the latch assembly over the retaining spring ring on the spindle.
  2. Push the slider along the face of the latch assembly until it clicks in place behind the retaining spring ring.
  3. Remove the spindle by gently pulling it out of the latch

Removing the Roses

With the spindle removed, the roses (the decorative outer pieces) can be easily pried off using slight pressure with your fingers, a flathead screwdriver, or even a butter knife.

AD

Now, you should have your Kwikset door knob completely removed. If you're replacing it with a new one, ensure the new knob's size and type are compatible with your door's latch assembly. Always test the new knob in your door before fully installing it.

Remember, patience and careful handling are key to a successful removal and reinstallation. If at any point you feel unsure, don't hesitate to consult a professional locksmith.

Bonus tip: While you have your door opened up, consider lubing the latch mechanism to ensure smooth operation and long-term functionality. A little bit of WD-40 or graphite powder goes a long way.

AD

Well done! You've just learned how to remove a Kwikset door knob. Now go ahead, repair or replace that faulty knob, and enjoy the smooth operation of your door once again.

AD