how to remove commercial door handle

DIY Guide: Effortlessly Remove Commercial Door Handles

By James Taylor
AD

Is your commercial door's handle showing signs of wear and tear? Are you eager to replace it with a new, sleek design? Removing a commercial door handle might seem daunting, but with the right steps, you can tackle this task yourself. Let's dive into a comprehensive guide on how to remove a commercial door handle safely and efficiently.

Before we start, ensure you have the following tools on hand: a flathead screwdriver, an adjustable wrench, a hammer, and a drill with a metal drill bit (if needed). Also, turn off the power to the door if it's an automatic one. Now, let's proceed with the removal process.

Preparation

Before diving into the removal process, it's crucial to understand the type of door handle you have. Commercial doors often have handle sets that are secured differently. The most common types are rim cylinders and mortise locks. Identifying the type will help you gather the right tools and approach the removal correctly.

AD
Fix Loose Front Door Handles in Minutes: DIY Guide
Fix Loose Front Door Handles in Minutes: DIY Guide
the door handle on a wooden door with text overlay how to remove doorknob handlesets
the door handle on a wooden door with text overlay how to remove doorknob handlesets
How to Remove a Door Handle With No Visible Screws - DailyHomeSafety
How to Remove a Door Handle With No Visible Screws - DailyHomeSafety

Once you've identified the type, gather any additional tools you might need, such as a center punch or a chisel, depending on the situation. It's always better to be overprepared than underprepared.

Gathering Tools

As mentioned earlier, you'll need a flathead screwdriver, an adjustable wrench, a hammer, and possibly a drill. You might also need a center punch or a chisel, depending on the handle's condition and security. Additionally, if your handle has any screws, make sure you have the correct size screwdriver for them.

How to remove this door handle?
How to remove this door handle?
How To Replace The Door Handle Step By Step
How To Replace The Door Handle Step By Step

For your safety, wear work gloves and safety glasses. The process might involve hammering and drilling, so it's essential to protect yourself from any potential debris or injury.

Preparing the Door

Before removing the door handle, ensure the door is locked in the open position. This will give you ample space to work and prevent any accidental locking or unlocking while you're focused on the removal process. If it's an automatic door, remember to turn off the power first.

AD

Next, check if there are any screws orSet screws securing the handle to the door. If there are, remove them using an appropriate flathead screwdriver. Be careful not to damage the screws or the door's surface while doing this.

Removing the Door Handle

Now that you've gathered your tools and prepared the door, you're ready to remove the handle. The process will differ slightly depending on the type of handle and lock you have. Let's go through the two most common types.

If you're unsure about any part of the process, don't hesitate to consult a professional. It's always better to take your time and do it right than to cause damage that could lead to expensive repairs.

AD

Removing a Rim Cylinder Handle

Rim cylinder handles are typically surface-mounted and secured with screws. To remove one, you'll first need to remove the rose (the decorative cover) using a flathead screwdriver. Unscrew the rose and lift it off. Then, use an adjustable wrench to turn the faceplate counterclockwise until it's unscrewed. Finally, pull the handle away from the door to remove it.

If the handle is stuck, you might need to use a chisel and a hammer to gently tap it loose. Be careful not to damage the handle or the door. If the handle is still stubborn, you might need to drill out the set screw that secures the handle to the spindle. Always drill slowly and carefully to avoid damaging the door.

Removing a Mortise Lock Handle

Mortise lock handles are typically satin-finished and require a bit more precision to remove. To remove one, you'll need to first remove the rose using a flathead screwdriver. Then, use an adjustable wrench to turn the faceplate counterclockwise until it's unscrewed.

AD

Next, you'll need to remove the set screw that secures the handle to the latch. This usually requires a drill with a metal drill bit. Drill out the set screw carefully, making sure not to damage the latch or the door. Once the set screw is removed, the handle should come off easily.

Remember, every door and handle is unique, so always approach the removal process with patience and care. If you're unsure about any part of the process, don't hesitate to consult a professional. They can provide guidance tailored to your specific situation and ensure the job is done safely and correctly.

Once you've successfully removed your old door handle, you can now proceed with installing the new one. Always follow the manufacturer's instructions for the best results. Happy handling!

AD