How to Remove Commercial Door Handle
Ever needed to replace or remove a commercial door handle but found yourself puzzled about where to start? You're not alone. Many find the task daunting, but it's actually quite straightforward once you know the steps. Let's guide you through the process with this comprehensive, SEO-optimized tutorial on how to remove a commercial door handle.
Before we dive in, remember, safety first. Have your tools ready—you'll mainly need a flathead screwdriver, a drill with a screwdriver bit, and maybe a chisel for stubborn handles. Ensure the door is closed and the lock is engaged to prevent any accidental openings during the process.
Understanding Your Door Handle
Commercial door handles come in various styles, but they all have one thing in common—they're secured with screws. Knowing where these screws are located is crucial. Typically, they're hidden under small screws or covers, which we'll need to remove first.
Most commercial door handles are secured with two screws at the top and bottom. Some might have more, while a few have a single long screw in the center. Familiarize yourself with your specific model before you start. It's like reading a map before embarking on a journey—knowledge is your power here!
Preparing Your Door Handle for Removal
Before we start unscrewing, let's make a small but crucial preparation. Since door handles often leave behind holes, you might want to fill them after removal, especially if you're not replacing it with the same model. To do this, you'll need some wood filler or putty.
Apply a small amount of wood filler into the holes left by the screws. Gently smooth it out using a putty knife or your finger (wear gloves to avoid staining). Let it dry according to the package instructions. Once dry, use sandpaper to level the surface, making it ready for painting or filling with a different material.
Removing the Cover Screws
Now that we're all set, let's start with the removal process. As mentioned, the screws securing the door handle are often hidden. To access them, you'll need to remove the small screws or covers. Grab your flathead screwdriver and insert it into the slot.
Gently pry the cover or screw head up and out. If it's stuck, try using a wider or angled screwdriver to get better leverage. If the top of the screw is broken, don't worry—we can still remove it with a drill.
Removing the Main Screws
With the cover screws removed, the main screws—the ones actually securing the door handle—should be exposed. Using your drill with a screwdriver bit, unscrew these carefully. If they're too tight, you might need to use a drill with more torque or switch to a cordless drill.
If the screws are rusted or stripped, you might need to use a tap remover or a drill bit to create a hole in the center. Then, use a bolt extractor to grab onto the screw and twist it out. It's like a leroy jensen lockout tools, but for screws!
Removing the Door Handle
With all the screws removed, the door handle should now be free. If it's not coming off easily, try gently wiggling it side to side while pulling. Sometimes, the handle needs a little coaxing to release from the latch mechanism.
Once off, carefully set it aside. You might need it for reference if you're filling the holes or replacing it with a different model. With the handle gone, your door is now ready for the next step—whether that's filling the holes, repainting, or installing a new handle.
Removing a Non-Removable Door Handle (Tips for Contingencies)
In some cases, the handle might not budge even after all screws are removed. This could be due to rust, worn-out latch mechanisms, or misalignment. If this happens, don't force it—you could damage the door or the handle itself.
Instead, try drilling a small hole in the middle of the handle and inserting a chisel. Gently tap the chisel to break the handle into smaller pieces. This method should be used as a last resort and with extreme caution. If all else fails, consider consulting a professional locksmith or door expert.
Preventing Rust and Future Hassles
Rust can make removing door handles a nightmare. To prevent this, use stainless steel or coated screws when reattaching your handle. If your door handle has become rusty, applying WD-40 or a rust dissolver can help break down the rust and make removal easier.
Moreover, lubricating your door handle and latch mechanism regularly can prevent future issues. A simple spray of WD-40 or graphite powder can keep things moving smoothly and prevent rust buildup.
And there you have it! You've successfully removed your commercial door handle. Now, go ahead and fill those holes, paint over the door, or install a new handle. The world's your oyster, and now you've got the know-how to tackle this common maintenance task. Happy DIYing!