how to change the head on a stihl weedeater

Step-by-Step: How to Change the Head on a Stihl Weedeater

By Kevin Lewis
AD

Regular maintenance of your STIHL weed eater, including changing its head, is crucial for its optimal performance and longevity. This simple procedure can save you time, money, and ensure that your weed eater is always ready for action. Let's dive into the step-by-step process of changing your STIHL weed eater's head.

Before we start, ensure you have the following tools and materials readily available: a new weed eater head, a Phillips screwdriver, and a pair of pliers. Also, always remember to disconnect the weed eater from its power source before performing any maintenance tasks.

Preparation and Removing the Old Head

Begin by disconnecting the weed eater's spark plug cap and removing the wire from the recoil starter handle to prevent any accidents. Unplug the tool from its power source for added safety. Then, follow these steps to remove the old head:

AD
Change String Stihl Weedeater Easy Method ! Bump Feed Head / Test Run
Change String Stihl Weedeater Easy Method ! Bump Feed Head / Test Run
Stihl Trimmer Head-How To Rewind A 2 String Head - 25-2
Stihl Trimmer Head-How To Rewind A 2 String Head - 25-2
779K views · 8.1K reactions | How to change out a stihl head for a echo speedfeed head. #dslawnandlandscape #stringtrimmerhacks #trimmermod #echospeedfeed #headswap #lawnmaintenance #lawncarehowto #lawncare | D’s Lawn & Landscape
779K views · 8.1K reactions | How to change out a stihl head for a echo speedfeed head. #dslawnandlandscape #stringtrimmerhacks #trimmermod #echospeedfeed #headswap #lawnmaintenance #lawncarehowto #lawncare | D’s Lawn & Landscape

1. **Locating the Head Mount:** Find the head mount on your STIHL weed eater. It's typically a round, plastic component where the head attaches to the tool's shaft.

2. **Removing the Head Nut:** Using a Phillips screwdriver, loosen and remove the head nut that secures the head to the shaft. You can use pliers to grip and turn the nut if you find it difficult to do so with a screwdriver.

No Start? No Spark? How to fix your STIHL String Trimmer Weed Whacker
No Start? No Spark? How to fix your STIHL String Trimmer Weed Whacker
HOW-TO - Stihl String C 25-2 Trimmer Head Replacement - Video
HOW-TO - Stihl String C 25-2 Trimmer Head Replacement - Video

Identifying Your Weed Eater's Head Type

Before installing the new head, it's essential to identify which type your STIHL weed eater uses. STIHL offers two types of heads: the standard line trimmer head and the more advanced universal automatic head.

1. **Standard Line Trimmer Head:** If your weed eater has a spool with a single line, it's a standard line trimmer head. 2. **Universal Automatic Head:** If the spool has multiple lines and an adjustable knob, it's a universal automatic head.

AD

Initiating Installation: Aligning the Head

Before attaching the new head, ensure that the two notches on the shaft are aligned with the two slots on the head mount. This alignment will help you secure the head correctly and allow it to spin smoothly once mounted.

Start by sliding the head onto the shaft, ensuring that the notches and slots align correctly. Once the head is fully seated against the head mount, you're ready to secure it in place.

Installing the New Head

Now that you've successfully removed the old head and aligned the new one, it's time to install the new head onto your STIHL weed eater.

AD

1. **securing the Head with the Nut:** Once the head is seated properly, use your Phillips screwdriver to carefully screw the head nut back onto the shaft, ensuring it's securely attached. Be mindful not to overtighten the nut, as this can cause ghosting (uneven line rotation) or even damage your weed eater.

Loading the Line (if applicable)

After securing the head, you'll need to load the trimmer line if your weed eater uses a standard line trimmer head.

1. **Pulling the Line:** Insert the tip of the loading tool (or a pen, if one isn't provided) into the hole on the head's edge. Pull the line out through the hole until you have around 3/4 of an inch to 1 inch of line ready to be cut.

AD

2. **Adjusting the Line Length:** Using your tape measure, mark the desired line length (usually between 10 to 15 inches). Cut the line to the desired length using a pair of scissors or a sturdy pair of pliers.

Preparing the Weed Eater for Use

With the new head securely attached and the line loaded (if applicable), your STIHL weed eater is now ready for use.

1. **Reconnecting the Spark Plug Cap:** Reattach the spark plug cap to your weed eater, ensuring the recoil starter handle is correctly positioned. Plug in the weed eater to its power source.

2. **Testing the Weed Eater:** Ensure the safety guard is in place, and slowly pull the starter rope to start your weed eater. Allow the engine to run for a few minutes to ensure it's functioning correctly.

Changing your STIHL weed eater head is an essential maintenance task that ensures your tool remains efficient and reliable. Regularly inspecting and replacing the head will help you achieve clean cuts and prolong the life of your STIHL weed eater. Happy gardening!

AD