how to change string on echo weedeater

"Change String on Echo Weedeater: Step-by-Step Guide"

By Jessica Jackson
AD

Tired of your Echo Weedeater letting out a constant stream of smoky fumes while yard maintenance? It might be time to replace that old, worn-out string. Not to worry, changing the string on your Echo Weedeater is a straightforward process. We've designed this comprehensive guide to walk you through the step-by-step procedure.

Before beginning, ensure you have the right tools at hand. You'll need a new string (ensure it's compatible with your Echo Weedeater model), a Phillips head screwdriver, and perhaps some protective gloves and goggles for safety.

Preparation: Disassemble Your Echo Weedeater

Starting off, you'll need to disassemble your Echo Weedeater to get to the spool where the string is housed. Position your Echo Weedeater so that the Spark Plug wire is facing up.

AD
Fastest Way to String Weed Eater
Fastest Way to String Weed Eater
How to restring an Echo SRM 210 weedeater
How to restring an Echo SRM 210 weedeater
HOW TO STRING DOUBLE-HEADED WEED EATERS #shorts
HOW TO STRING DOUBLE-HEADED WEED EATERS #shorts

Use your Phillips head screwdriver to unscrew the shiny, silver screw at the bottom of your Echo Weedeater. Once loose, pull the bottom cover off to expose the spool.

Removing the Old String

Locate the string tabs holding the string in place. Pinch these tabs together to release the string tension. This will allow you to pull the old string out.

HOW TO Re-String A Weedeater Grass Trimmer
HOW TO Re-String A Weedeater Grass Trimmer
How to Change the String on a Dewalt 20v String Trimmer
How to Change the String on a Dewalt 20v String Trimmer

Slide the old string out completely by pulling from one end. Most of the string should come out from the top of the Echo Weedeater, but you may need to help it along by pulling gently from the bottom as well.

Cleaning the Spool

Before installing the new string, take a moment to clean the spool. Any debris left behind could cause your new string to break or become damaged more quickly.

AD

Wipe down the spool with a clean cloth to remove any dust or debris. Ensure it's completely dry before installing the new string to prevent any moisture-related issues.

Installing the New String

Now it's time to thread the new string onto your Echo Weedeater. Ensure the new string is compatible with your model. If you're unsure, check your Echo Weedeater's user manual or contact Echo's customer support.

Begin by threading one end of the new string through the hole in the right side of the spool. Let the majority of the string rest on the spool, leaving only a few inches hanging out.

AD

Winding the String

Start winding the string around the spool clockwise, keeping the string tight against the spool as you go. Be careful not to overlap the string as this can cause it to fray or break more quickly.

Continue winding until you reach the end of the string. Leave about 10 feet of string hanging out from the bottom of the spool. This will give you enough string to use in your initial cuts and wind back up into the spool once used.

Securing the New String

Once your string is fully wound, pinch the string tabs together to release the string tension. This will help the string to wind back up onto the spool when you need it.

AD

Cut the excess string from the bottom of the spool, leaving only a few inches hanging out. Reassemble your Echo Weedeater by placing the bottom cover back onto the unit and screwing it back in using your Phillips head screwdriver.

There you have it! You've successfully changed the string on your Echo Weedeater. With this new string, your weed eater will be cutting through your yard with increased efficiency and less smoke. Happy yard work!

AD