Switching Stihl Polycut Blades: A Step-by-Step Guide
When it comes to maintaining your STIHL PolyCut hedge trimmer, changing the blades is a crucial task that should be done regularly for optimal performance. A sharp, clean blade ensures a precise cut, reduces strain on the motor, and prolongs the life of your tool. Here's a step-by-step guide on how to change STIHL PolyCut blades safely and efficiently.
Before we dive into the process, it's essential to understand that STIHL uses a modular blade system. This means that the blades lock into the trimmer's housing, not the trunk or the gearbox, making them easy to replace. Here's what you'll need:
Safety Equipment and Tools
Before you begin, ensure you have the following:
- New STIHL PolyCut blades
- Adjustable wrench
- Socket wrench (if applicable)
- Safety glasses
- Work gloves
- Petrol (if your trimmer is not self-sharpening)
Preparation: Servicing and Safety
Start by ensuring your PolyCut trimmer is unplugged from the power source or the fuel tank is empty to prevent accidental startup. Clean the blade area thoroughly to remove any debris or grass clippings that could hamper the replacement process.
It's also a good idea to service your trimmer at this point. Grease the Trisole Chain, clean the air filter, and check the spark plug (for petrol trimmers). This will keep your machine running smoothly.
Removing the Old Blades
To remove the old blades, first, identify the type of blades you have. Some are secured with a nut and bolt, while others have a quick-release mechanism. For nut-and-bolt blades:
- Use an adjustable wrench or socket wrench to remove the nut securing the blade. Counterclockwise rotation will loosen the nut.
- Once the nut is removed, slide the blade out from the tram housing.
For quick-release blades, follow these steps:
- Press the release catch while pulling the blade assembly outwards.
- The blade should slide out easily.
Important: Always ensure the blade is completely removed from the guide bar before attempting to sharpen or replace it.
Installing New Blades
Now that you've removed the old blades, it's time to install the new ones. The process is straightforward and fairly similar for both types of blade retention systems.
Installing Nut-and-Bolt Blades
1. Align the new blade with the blade slot in the housing. Ensure the teeth face the right direction (towards the front of the housing).
2. Slide the blade into the housing until the back of the blade is flush against the housing.
3. Replace the nut, ensuring it's properly lined up with the threaded stud. Secure the nut using an adjustable wrench or socket wrench. Tighten clockwise until the nut is snug. Do not overtighten.
Installing Quick-Release Blades
1. Align the new blade with the blade slot in the housing, ensuring the teeth face the correct direction.
2. Slide the blade into the housing until it locks into place. You should hear a ‘click’ sound, indicating that the blade is securely locked.
Note: If your trimmer is not self-sharpening (like the FS 56 RC-E), you'll need to sharpen the new blades before installation. Use a petrol-powered blade sharpener or take them to a professional service center.
Test the New Blades
Once the new blades are installed, it's time to test them out. If your trimmer is electric, plug it back in and turn it on. If it's petrol-powered, refill the tank and start the engine. Listen for any unusual noises, and observe the blades to ensure they're rotating correctly.
If everything seems to be in order, you're ready to get back to trimming those pristine hedges. Always remember to wear the appropriate safety gear when using any kind of power tool. Enjoy your manicured landscaping!