how to change rear shocks

Step-by-Step Guide: How to Change Rear Shocks

By Thomas White
AD

If you're an avid off-road adventurer or even a regular city driver who's noticed a decline in your ride's composure, it might be time to replace your rear shocks. As a crucial component of your vehicle's suspension, shocks play a pivotal role in handling, safety, and overall comfort. So, we've embarked on this comprehensive guide to show you how to change rear shocks in seven simple steps.

Before you begin, gather the necessary tools and components. You'll need jack stands, a jack, a breaker bar, sockets, a torque wrench, shock isolators, and of course, your new shocks. Ensure your new shocks match your vehicle's dimensions and specifications. Now, let's dive into the process.

Preparation and Disassembly

Numerous vehicles share the same process, but some steps may vary depending on your make and model. Always consult your owner's manual for specific details.

AD
How to Change Rear Shock Absorbers on BMW 3 E90 🚗🔧
How to Change Rear Shock Absorbers on BMW 3 E90 🚗🔧
Rear shock absorbers
Rear shock absorbers
How to Replace Rear Shocks 00-04 Nissan Frontier and XTerra
How to Replace Rear Shocks 00-04 Nissan Frontier and XTerra

Before you jack up your vehicle, engage the parking brake and place wheel chocks behind the front tires for added safety. Once you're high enough, use jack stands for stability. Now, let's remove those old shocks.

Disconnect the Old Shocks

Start by disconnecting the shock from the lower control arm. This usually involves using a breaker bar and socket to loosen and remove the mounting nut. Be prepared, as the shock may still be under pressure and antibounce anytime soon.

How to remove your rear shock - MBR
How to remove your rear shock - MBR
How to replace or repair the MacPherson struts
How to replace or repair the MacPherson struts

Next, disconnect the shock from the vehicle's frame or body. This can be done using an impact wrench or a standard wrench, depending on the type of mounting. Remove the shock completely, taking note of any washers or spacers used to prevent any confusion when installing the new ones.

Remove and Condition the Old Shocks

After disconnecting the shock, you might want to drain the old oil and check its condition. Cloudy or discolored oil indicates contamination or deterioration. If so, clean the area where the shock oils to prevent leakage in the new one. Also, if the shock body or piston rod shows signs of damage, consider replacing other suspension components.

AD

Don't forget to condition the shock mounting points. Grease or lubricate any metal-to-metal surfaces to minimize friction and ensure smooth operation of your new shocks.

Installing the New Shocks

Now, don't be overwhelmed if your new shocks don't compress easily. New, usually nitrogen-gas charged shocks, can be quite firm. Before installing, double-check your new shocks fit the mounting points and match your vehicle's specifications.

Mount the New Shocks to the Vehicle Frame

Begin by mounting the new shock to the vehicle's frame or body, ensuring you reinstall any washers or spacers you removed earlier. Tighten the bolts with your hand initially, just until snug. Most vehicles use 10-13mm bolts for this purpose.

AD

Once both ends are installed, carefully lower the vehicle to help the new shocks settle into place. Recheck the frame bolts for tightness and torque them to the manufacturer's specified poundage using a torque wrench.

Mount the New Shocks to the Lower Control Arm

With the vehicle still slightly off the ground, connect the other end of the new shock to the lower control arm. Place the shock eye over the control arm pivot and secure it with a new nut and washers. Tighten this nut with your hand initially.

Again, lower the vehicle slightly to allow the new shock to settle. Recheck the nut for tightness, then use your torque wrench to secure it properly. Most vehicles specify around 20-35 ft-lbs for this nut.

AD

The Final Touches

After finalizing the mounting bolts, gently bounce the vehicle to allow the new shocks to settle fully. Look for any leaks or unusual movements, which could signal incorrect installation or a need for further adjustments.

Finally, with your other hand, attach the new spring isolator or Dust boot. Some vehicles require specific lubes for the isolator to work correctly, so check your manufacturer's guide. Lastly, take your vehicle for a test drive to listen for any unusual noises and feel for proper handling.

Regular maintenance of your shocks goes a long way in ensuring a smooth, safe ride. So, don't shy away from inspecting them every now and then, or during regular service intervals. Happy adventuring!

AD