how to change rear derailleur cable

Step-by-Step Guide: How to Change a Rear Derailleur Cable

By William Martin
AD

Changing your rear derailleur cable can significantly improve your bike's shifting performance. This easy-to-follow guide will walk you through the process, ensuring a crisp, smooth ride.

Before you start, gather your tools - a cable cutter, a cable cutter to remove the old cable, pliers, a spoke wrench, and your new cable and housing. It's also a good idea to have some grease and zip ties on hand.

Preparation and Removal of Old Cable

The first step is to prepare your workspace and remove the old cable. Find a stable surface to work on and shift your derailleur to the smallest sprocket.

AD
an image of the parts of a bicycle that is attached to it's front wheel
an image of the parts of a bicycle that is attached to it's front wheel
How to Install and Adjust Your Front Derailleur
How to Install and Adjust Your Front Derailleur
a hand is holding a metal wire on a black background with the light shining through it
a hand is holding a metal wire on a black background with the light shining through it

Remove the old cable by releasing the cable tension with a spoke wrench. Once released, carefully cut the cable using a cable cutter. Remove the old cable and housing completely.

Routing the New Housing

Start by installing the new housing. Route it from the shift lever, behind the cable guide on the frame, and down to the derailleur. Ensure the housing is smooth and free of kinks.

the front end of a bicycle with words on it that read, how to guide
the front end of a bicycle with words on it that read, how to guide
Tips and Tricks to Adjust Your Bike's Rear Derailleur
Tips and Tricks to Adjust Your Bike's Rear Derailleur

Use zip ties to secure the housing to the frame. This prevents the housing from moving and putting excess stress on the cable when you shift.

Installing the New Cable

Insert the new cable through the housing, starting from the shift lever end. Use the cable end to pull the cable through, ensuring it's fully seated in the housing.

AD

Once the cable is through, shift your derailleur to the largest sprocket. This ensures the cable is under tension when you crimp the anchor bolt.

Tuning and Final Adjustments

Now that your new cable is in place, it's time to fine-tune your derailleur for precise shifting.

Shift through all gears, observing the derailleur's alignment. If the derailleur shifts too far to one side, you may need to adjust the limit screws on the derailleur.

AD

Adjusting the Barrel Adjuster

The barrel adjuster is located near the shift lever. It allows you to fine-tune the cable tension without removing the housing.

Turn the adjuster clockwise to increase tension (making it harder to shift) and counterclockwise to decrease tension (making it easier to shift). Find the balance that allows for smooth, effortless shifting in all gears.

Cleaning and Lubrication

After you've adjusted the cable, apply a small amount of grease to the cable end. This helps keep the cable lubricated and prevents corrosion.

AD

Finally, give your bike a quick test ride. Shift through all gears, checking for any issues. If everything feels smooth, you've successfully changed your rear derailleur cable!

Regularly inspecting and maintaining your bike's components can greatly improve your riding experience. Changing your rear derailleur cable is a simple, yet effective way to keep your bike shifting smoothly. Happy riding!

AD