how to change rear dirt bike tire

How to Change a Rear Dirt Bike Tire: A Step-by-Step Guide

By Kevin Miller
AD

Regular maintenance for your dirt bike is crucial, and learning how to change a rear dirt bike tire is an essential skill every rider should have. Accidents happen and tires wear out, so knowing this process can save you time, money, and keep you safe on the trails. Let's break down this task into easy-to-follow steps.

Before we dive in, ensure you have the following tools and materials on hand: a tire irons set, a tube of tire lube, an air compressor, a new tire, and a spare tube. Always prioritize safety, so protect your hands with gloves and wear safety glasses to guard your eyes.

Preparation and Removing the Old Tire

The first step involves preparing your dirt bike and removing the old tire. Start by locating the tire's valve stem. Deflate the tire completely using the air compressor, then remove the valve stem core and air chuck from the compressor.

AD
Dirt Bike Rear Tire and Tube Changing
Dirt Bike Rear Tire and Tube Changing
How to Change a Tire on a Dirt Bike |7 Steps Guide (2026)
How to Change a Tire on a Dirt Bike |7 Steps Guide (2026)
How to change a motocross tire easily? TMT4 Lite
How to change a motocross tire easily? TMT4 Lite

Using the tire irons, pry the bead of the tire off the rim. You'll likely need to apply some力, but be patient to avoid damaging the rim. Work your way around the tire, using the first tire iron to hold one side down while you pry up the other side with the second iron. Once the bead is off on both sides, the tire should come off easily.

Removing the Old Tube

With the tire off, you can now remove the old tube. Start by closing the rim hole with your hand, then inflate the tube slightly. This will help you locate the hole, which should be leaking air. Mark the location of the hole with a pen or marker once you've found it.

How To Change a Dirt Bike Tire
How To Change a Dirt Bike Tire
How to change Dirt Bike Tire!
How to change Dirt Bike Tire!

Deflate the tube completely and remove it from the rim. Inspect the tube carefully, and if the hole is repairable, you can use a tube patch kit to fix it. However, for most trail riders, it's recommended to replace the tube entirely to ensure safety and longevity.

Inspecting the Rim Tape and Rim

Before installing the new tube, it's essential to inspect the rim tape and rim for any damage. The rim tape is a critical barrier between the tube and the rim, preventing punctures. If the tape is worn or damaged, replace it.

AD

Now, meticulously inspect the rim for any sharp or rough edges that could cause a tube puncture. Use some fine-grit sandpaper to smooth down any offending areas. A slight bend in the rim may work, but if it's severely damaged, you'll need to replace it.

Installing the New Tube and Tire

With the rim tape and rim checked and repaired if necessary, you can now install the new inner tube. Ensure the valve stem is at the 6 o'clock position – this will make it easier to install the tire. Inflate the tube slightly to help it hold its shape and slide it into the rim.

With the tube in place, it's time to mount the new tire. Tire lube is your friend here – apply a small amount around the bead to help the tire slide onto the rim more easily. Start by seating the tire on one side of the rim, then use the tire irons to work your way around, again being careful not to damage the rim.

AD

Inflating the Tire

Once the tire is fully seated, you can begin inflating it. Use a shock pump for the initial inflation, checking for any areas that leap out or bulges that indicate the tube is not correctly seated. If you encounter this issue, deflate the tire and adjust the tube's position.

Inflate the tire to the recommended pressure for your dirt bike model and riding style. Too little air, and the tire will overflex, causing excessive wear and heat buildup. Too much air, and the tire will be less grippy and have a harsh ride. As a general rule, start at the recommended pressure, and adjust as needed based on your personal preference and riding conditions.

Final Touches

With the tire inflated, give the entire wheel a spin to ensure it spins freely. The rim should not rub against the brake rotor or rotors. If it does, you may need to adjust or replace components to eliminate the contact.

AD

Now that your new tire is installed, take your dirt bike for a test ride in a safe, controlled environment to ensure everything is working as expected. Keep an eye on the tire's pressure and performance, making adjustments as needed to suit your riding style.

Changing a rear dirt bike tire is a straightforward process once you've done it a few times. Regular maintenance, like tire changes, helps keep your bike in top shape and ensures you're safe on the trails. Happy riding!

AD