how to change rear brake pads and rotors

How to Replace Rear Brake Pads and Rotors: Step-by-Step Guide

By Thomas Harris
AD

Changing your rear brake pads and rotors can significantly improve your vehicle's stopping power and safety. Over time, these components wear down due to friction, making them less effective. Regular inspection and timely replacement ensure optimal performance. Let's dive into a step-by-step guide to help you through this process.

Before you begin, ensure you have the right tools and materials. You'll need a jack, jack stands, lug wrench, socket set, C-clamp or brake pad spreader, brake grease, and new pads and rotors compatible with your vehicle. It's also a good idea to have gloves and safety glasses for your protection.

Preparation and Dismantling

Start by safely lifting your vehicle, securing it with jack stands. Remove the rear wheels using a lug wrench. Set them aside, making sure to note the orientation for re-installation.

AD
an image of a car engine with the words pov how to change your rear brake pads and rotors
an image of a car engine with the words pov how to change your rear brake pads and rotors
How to Change Brake Pads and Rotors
How to Change Brake Pads and Rotors
How to Change Your Brake Pads
How to Change Your Brake Pads

Locate the brake caliper and apply penetrating oil around the slide pins. This will help in removing the caliper if it's stuck due to rust or corrosion. Let it soak for a few minutes before proceeding.

Caliper Removal

Using a C-clamp or a brake pad spreader, push the caliper piston back into its bore. This will create space for the new, thicker brake pads. Once the piston is fully depressed, remove the caliper and hang it from the vehicle's frame using a coat hanger or a bungee cord to prevent stress on the brake hose.

someone is changing the brake pads on a car
someone is changing the brake pads on a car
How to Change Rear Rotors and Brake Pads on a Ford F150
How to Change Rear Rotors and Brake Pads on a Ford F150

Remove the two mounting bolts holding the brake pad holder. Use a socket wrench to unscrew them in a counterclockwise direction. With the bolts removed, the pad holder should slide off easily, revealing the brake rotor.

Rotor Removal

Using your socket set, remove the lug nuts securing the rotor. You might need to apply some force, as they may be tight. Once removed, set them aside with the wheel lugs from earlier to ensure you have all the parts for reassembly.

AD

Now, carefully lift the rotor off the hub. It might be a tight fit, so you may need to use a flathead screwdriver or a pry bar to gently lift it off. Be cautious not to damage the rotor or the hub surface.

Inspection and Installation

Inspect the rotor for signs of uneven wear, such as scoring or grooving. If found, consider replacing both rotors for even wear and improved safety. Clean the hub and mounting surface to remove any dirt or debris.

Slide the new rotor onto the hub. Ensure it's properly seated and centered. Install the new pad holder, aligning it with the caliper mounting bolts. Apply anti-seize or brake grease to the bolts to prevent seizing.

AD

Pad Installation

Take your new brake pads and insert them into the pad holder. Ensure the pad with the wear indicator (usually a metal strip) is positioned on the outside. Push the brake caliper back over the pads, aligning the slide pins with their respective holes.

Reinstall the caliper mounting bolts using your socket wrench. These bolts need to be torqued to the specifications outlined in your vehicle's repair manual. Over-tightening can cause the pads to drag, reducing their lifespan and potentially damaging the braking system.

Reassembly

Before remounting the wheel, inspect your work. Make sure all components are properly installed and aligned. Reinstall the lug nuts and tighten them by hand. Lower your vehicle and fully tighten the lug nuts using a torque wrench to the manufacturer's specifications.

AD

Repeat the process for the other rear wheel. Once both wheels are installed, drive your vehicle at a low speed to bed in the new brake pads. This helps to create a uniform surface on the pads and rotor, maximizing their effectiveness.

Regular maintenance, including timely brake pad and rotor changes, is crucial for your vehicle's safety and longevity. If you're uncertain about any part of the process, don't hesitate to consult a professional mechanic. Safe driving!

AD