how to change rear brakes

Step-by-Step Guide: How to Change Rear Brake Pads

By David Young
AD

Safely changing your rear brakes can significantly improve your vehicle's handling and braking performance, and it's a routine maintenance task you can easily perform at home. This comprehensive guide will walk you through the process, ensuring you'll be back on the road smoothly and confidently.

Before you begin, you'll need a few tools and materials. Make sure you have a jack, wheel wedges, lug wrench, C-clamp or brake hose pliers, brake fluid, and new brake pads that match your vehicle's make and model. Always prioritize safety, so wear gloves to protect your hands and work in a well-lit, secure location.

Preparation and Diagnosing Brake Issues

Before you dive into the procedure, it's crucial to diagnose the issue and become familiar with your vehicle's brake system. Visually inspect the brake pads for wear, checking their thickness against the wear indicator instructions in your vehicle's owner's manual. It's recommended to replace any pad under 0.25 inches (6 millimeters) thick.

AD
an image of a car engine with the words pov how to change your rear brake pads and rotors
an image of a car engine with the words pov how to change your rear brake pads and rotors
someone is changing the brake pads on a car
someone is changing the brake pads on a car
Change \
Change \

Awarning indicator light on your dashboard may also alert you to the need for new pads. However, don't solely rely on the light; some vehicles can provide false positives. Take your car to a professional if you're unsure about the issue before performing any work.

Preparing Your Vehicle for Brake Replacement

Before you begin, you must safely elevate your vehicle and secure it securely. Use a jack to lift the car high enough to remove the tires, then place wheel wedges or jack stands underneath for extra support. Once your vehicle is secure, use a lug wrench to loosen and remove the lug nuts.

a poster with instructions on how to change your brake pads and what they mean for you
a poster with instructions on how to change your brake pads and what they mean for you
How To Change, Replace Rear Drum Brake Shoes
How To Change, Replace Rear Drum Brake Shoes

It's essential to loosen the lug nuts before completely lifting the vehicle, as this will prevent them from getting tighter due to the wheel's weight. Once the lug nuts are loose and the car is safely lifted, you can completely remove the wheels.

Removing the Old Brake Pads

The first step in replacing your rear brakes is to remove the old brake pads. Locate the brake caliper and slide the caliper pins or bolts out of their place. You may need a C-clamp or brake hose pliers to compress the caliper piston, as it won't typically fit through the caliper housing once the new brake pads are in place.

AD

Before you proceed, be sure to position the caliper atop the brake rotor but not hanging by the hose. This will prevent the hose from breaking under its own weight. Finally, extract the old brake pads from their place inside the caliper and set them aside for disposal.

Installing New Brake Pads

Now that your old brake pads are removed, you can install the new ones in their place. Inspect the new pads for any imperfections or sharp edges and smooth them out as necessary. Locate the pad retainer spring that fits into the top of each pad and clip it into place.

Before placing the new brake pads into the caliper, lubricate the contact points where the pads meet the caliper. This will help prevent squeaking and squealing noises once you begin driving again. Next, position the new pads into the caliper, ensuring the anti-rattle springs or clips are properly installed.

AD

Reassembling the Brake Caliper

With the new brake pads securely in place, you can now reattach the caliper. Using a hammer or a brake caliper tool, gently tap or push the caliper piston back into its housing. Be sure to apply even pressure to avoid damaging the piston or inner mechanisms.

Once the piston is reset, reattach the caliper pins or bolts, ensuring they're properly lubricated to prevent rust and ensure functionality. Finally, replace the wheel and firmly tighten the lug nuts by hand to avoid cross-threading.

Lowering Your Vehicle and Breaking In the New Pads

After securing the lug nuts, lower your vehicle to the ground, then use a wrench to tighten the lug nuts fully. Remove the wheel wedges or jack stands and give the lug nuts a final tighten to ensure they're properly secured. Now that your vehicle is lowered, it's time to break in the new brake pads.

AD

Gradually apply and release your brakes as you drive for the first few miles to allow the brake pads to create a proper contact point or "bed in" on the rotor's surface. This will help prevent brake squeaking and optimize their performance. During this process, avoid heavy braking until you've driven approximately 100 miles.

Now that you've successfully replaced your rear brakes, ensure you regularly inspect your brake pads every 30,000 to 70,000 miles (depending on your vehicle and driving conditions) to keep your car running smoothly and safely. Always remember that well-maintained brakes are essential for confident driving."

AD