how to change shimano brake pads

Change Shimano Brake Pads: Step-By-Step Guide

By Sarah Jackson
AD

Cycling enthusiasts and DIY bike mechanics alike understand the importance of maintaining Shimano brakes for optimal performance and safety. Over time, brake pads wear out, and replacing them is a straightforward task that can be done at home. This guide will walk you through the process of how to change Shimano brake pads, ensuring a smooth stop every time.

Before starting, gather your tools: new brake pads, a Phil darkeye or similar tool, a 2mm hex key, and a 10mm wrench. Also, ensure your bike is on a stable stand or raccoon stand. Let's begin!

Preparation and Removing the Old Pads

The first step is to prepare your bike and loosen the brake pads. Remove the wheel from the bike to gain better access to the brake pads.

AD
HOW TO CHANGE FIT BRAKE PADS SHIMANO BRM HYDRAULIC BICYLE DISC BRAKES
HOW TO CHANGE FIT BRAKE PADS SHIMANO BRM HYDRAULIC BICYLE DISC BRAKES
How to Replace Disc Brake Pads
How to Replace Disc Brake Pads
How To Change Brake Pads On A Mountain Bike Easily
How To Change Brake Pads On A Mountain Bike Easily

Use a 2mm hex key to loosen the brake pad fixing bolt. This will allow the pad to move freely. Do not remove the bolt entirely. Next, use a 10mm wrench to loosen the pad's central boss that holds the pad in place.

Identifying Left and Right Pads

Shimano brake pads are not identical. The left pad has a small 'L' stamped onto it, while the right pad has a 'R'. This is to ensure correct alignment and proper mating with the brake shoe.

How to Replace Disc Brake Pads
How to Replace Disc Brake Pads
How To Replace Your Disc Brake Pads
How To Replace Your Disc Brake Pads

Visualize your bike from the rider's perspective: the left pad is the one closest to the chainstay, while the right pad sits near the frame's seat stay.

Extracting the Old Pads

Insert the Phil darkeye (or similar tool) into the gap between the pad and the boss. Shift the tool to the left to release the pad. The pad should now slide out easily.

AD

Inspect the removed pad for signs of excessive wear. If any teeth-like notches appear on the pad's surface, it needs replacing immediately. Also, check the pad's spring for any signs of damage or deformation.

Installing the New Pads

The process of installing new pads follows much the same procedure as removing the old ones, just in reverse.

Inspect your new pads to confirm they are labeled correctly with 'L' and 'R'. Align the notches on the boss and the pad, with the pad's label facing outwards.

AD

Aligning and Inserting the New Pads

Press the pad gently into place, with the label facing outwards. You'll hear a soft clicking sound as the teeth engage with the notches on the boss. Make sure the pad is fully engaged; you shouldn't be able to move it inwardly or outwardly without significant force.

With the pad in place, tighten the fixing bolt with the hex key, following the 'clockwise tightens' rule. Ensure the pad has a gap of 1-2mm with the rim braze-on or rotor, and the pad is aligned with the brake shoe. This ensures optimal braking performance and prevents premature wear.

Tensioning the New Pads

Using the 10mm wrench, rotate the boss clockwise to tension the brake pad spring. Rotate it until there's a 1-2mm gap between the pad and the rim. Be careful not to overtighten; this can damage the pad and spring.

AD

Retighten the brake pad fixing bolt to secure the pad. Reinstall the wheel, then squeeze the brake lever a few times to ensure the pads are aligned correctly and the brakes function properly.

That's it! You've successfully changed your Shimano brake pads. Regularly checking your brake pads and following this guide will ensure your bike's brakes are in optimal condition, keeping you safe on the roads. Happy cycling!

AD