how to turn off water heater pilot light

How to Turn Off Water Heater Pilot Light: Step-by-Step Guide

By Emily Thompson
AD

Are you ready to save on your energy bills by turning off your water heater's pilot light? This feature, present in many natural gas and propane water heaters, is a safety measure that keeps your heater ready for use. However, it also uses energy even when you're not using hot water. By learning how to turn off the pilot light, you can take control of your energy consumption. Let's dive into a step-by-step guide to help you achieve this.

Before we begin, it's crucial to understand that turning off the pilot light is safe and straightforward. However, it's still a task that involves natural gas or propane, so always prioritize safety. If you're unsure about any step, don't hesitate to call a professional. Now, let's get started.

Preparation and Safety Measures

Before you begin, make sure to follow these safety measures:

AD
Why Your Pilot Light Keeps Going Out & How To Fix [With Pictures]
Why Your Pilot Light Keeps Going Out & How To Fix [With Pictures]
How to Check Water Heater Pilot Light | 6 Effective Steps (2026)
How to Check Water Heater Pilot Light | 6 Effective Steps (2026)
How To Light Pilot (Turn On) Water Heater. Honeywell Rheem whirlpool A. O. Smith. 
How To Light Pilot (Turn On) Water Heater. Honeywell Rheem whirlpool A. O. Smith. 
  • Locate your water heater: Find the gas valve on your water heater. It's usually located at the bottom of the tank.
  • Turn off the gas: Rotate the gas valve to the 'PILOT' or 'OFF' position. This turns off the gas supply to the pilot light.
  • Allow to cool: Wait for about 15 minutes to let the flame at the pilot light extinguish and the area cool down.
  • Check for leaks: Before you proceed, sniff around the area for any gas leaks. If you smell gas, leave the area immediately and contact your gas company.

Once you've completed these safety steps, you're ready to turn off the pilot light.

Gas Valve Knob Position

The first step in turning off the pilot light involves the gas valve knob. This knob usually has three positions:

a person is adjusting the red light switch on a wall mounted electrical device in their home
a person is adjusting the red light switch on a wall mounted electrical device in their home
How to Fix a Water Heater Pilot Light
How to Fix a Water Heater Pilot Light
  • ON: This position is marked with a line or an 'ON' label, indicating that the gas is flowing to the burner and pilot light.
  • OFF: This position is marked with a circular or oval shape, with the word 'OFF' written next to it. When the valve is in this position, no gas is flowing to the burner or pilot light.
  • PILOT: This position is marked with the word 'PILOT'. When the valve is in this position, only the pilot light is receiving gas. This is the default position for water heaters that are in use.

Your goal is to switch the knob from the 'PILOT' position to the 'OFF' position.

Extinguishing the Pilot Light

Once you've turned off the gas supply, it's time to extinguish the pilot light. Here's how:

AD
  1. Wait for the area to cool down. As mentioned earlier, wait for about 15 minutes after turning off the gas supply.
  2. Locate the pilot light. It's usually a small, steady flame at the bottom of the water heater. Some water heaters have a ceramicwijzer that points to the pilot light's location.
  3. Press down on the reset button. The reset button is typically located just above the pilot light. While pressing, hold a long matches or lighter close to the pilot light opening without touching it.
  4. Keep holding the reset button until you hear the burner ignite. This can take up to 60 seconds. Once it ignites, release the button. The burner should stay lit.
  5. Check your work. Listen for the igniter to click every time you turn your hot water tap on or off. If you hear it, the burner is off. If you don't hear anything, the burner is still on.

Remember, turning off your water heater's pilot light is a temporary measure. If you plan to be away from home for an extended period, it's best to set your water heater to its lowest setting or turn it off completely.

Turning Off the Pilot Light Completely

If you want to turn off your water heater's pilot light completely, you'll need to follow these additional steps:

Identify the Air Inlet

The air inlet is a small hole usually located near the base of the water heater. It's often marked with an 'AIR' or 'VENT' label. Its purpose is to let air into the combustion chamber when the burner is on.

AD

Turning off your water heater's pilot light completely involves sealing this air inlet. This prevents air from entering the combustion chamber, which stops the burner from working.

Seal the Air Inlet

To seal the air inlet, you can use a few solutions:

  • Plug or cap: Use a rubber plug or a small cap to seal the inlet. These can usually be found at your local hardware store.
  • Paper and tape: Cut a piece of paper or cardboard to fit over the inlet. Secure it with tape.
  • Duct sealant: Apply a small amount of duct sealant around the inlet. This is a more permanent solution.

Remember, turning off your water heater's pilot light completely means you won't be able to use hot water until you start it up again. So, this step is best if you're planning to be away from home for an extended period.

AD

Finally, if you've followed all the steps and successfully turned off your water heater's pilot light, great job! You've just taken a significant step towards reducing your energy consumption at home. However, always remember that safety is paramount when dealing with gas appliances. If you smell gas at any point or are unsure about any step, don't hesitate to call a professional. Until next time, stay safe and keep exploring ways to make your home more energy-efficient.

AD