how to string a worx weed eater

String Worx Weed Eater: Step-by-Step Guide

By Emily Hernandez
AD

Ever found yourself in the throes of a weed-clearing battle, only to have your Worx weed eater string break or fray, halting your gardening progress? Fear not, for this is a common gardening conundrum with an easilyfixable solution. In this comprehensive guide, we will walk you through the process of how to string a Worx weed eater, ensuring your gardening tasks are not interrupted by a broken string again.

Before we dive into the replacement process, it's essential to understand why your weed eater string might break in the first place. Regular wear and tear, encounters with tough weeds, or using a string that's not compatible with your Worx model can all contribute to string breakage. To avoid these issues, keep a spare string on hand and invest in a quality, compatible string for your Worx weed eater.

Understanding Your Worx Weed Eater String

First, let's demystify the weed eater string. Most Worx weed eaters use 0.065" or 0.080" oval or round co-polymer strings. The size and shape of the string can vary depending on your model, so always consult your user manual or contact Worx customer support for accurate information.

AD
HOW TO Re-String A Weedeater Grass Trimmer
HOW TO Re-String A Weedeater Grass Trimmer
String trimmer weed eater wacker will not start, diagnosis and EASY repair fix free!
String trimmer weed eater wacker will not start, diagnosis and EASY repair fix free!
The Best Weed Eater String on the Planet
The Best Weed Eater String on the Planet

Next, familiarize yourself with the different types of strings available. Bump feed, auto-feed, and fixed-line models are the most common. Understanding your string's feeding mechanism will help you choose the correct string for your Worx weed eater and install it correctly.

Identifying Your String Type

The type of string your Worx weed eater uses depends on its feeding mechanism:

  • Bump Feed: These strings are fixed in length and require you to "bump" the handle to release more line during use.
  • Auto Feed: These strings automatically feed line as needed, usually at a pre-set speed.
  • Fixed Line: These strings are a set length and do not feed out during operation.

Once you've identified your string type, it's time to choose a suitable replacement. Always opt for a high-quality, original Worx string or a compatible third-party alternative to ensure the best performance and longevity.

Choosing the Right String for Your Worx Weed Eater

When selecting a replacement string, consider the following factors:

AD
  1. Diameter: Ensure the string's diameter matches your weed eater's specification (0.065" or 0.080").
  2. Material: Most Worx strings are made of co-polymer, which offers a good balance of strength and flexibility. Avoid using nylon strings, as they can cause excessive wear and tear on your machine.
  3. Length: Consider the length of the string needed. Most Worx weed eaters use 20' to 50' of string, but this can vary by model.
  4. Feed mechanism: Ensure the string type (e.g., bump feed, auto-feed, or fixed-line) is compatible with your Worx weed eater's feeding mechanism.

By choosing a suitable string and understanding your weed eater's feeding mechanism, you're equipped to tackle the string replacement task with confidence. Now, let's delve into the step-by-step process of how to string a Worx weed eater.

Step-by-Step Guide to Stringing Your Worx Weed Eater

Before you commence, clear your workspace and disconnect the weed eater from any power sources. Gather your tools: new string, scissors or a sharp knife, and, if needed, a string immobilizer or line cutter tool specific to your Worx model.

With your tools and workspace ready, let's begin the stringing process:

AD

Preparation

Follow these initial steps to prepare your weed eater for stringing:

  1. Disassemble your Worx weed eater by removing the spool cover or by unlocking the spool and pulling it out.
  2. Unwind the remaining string from the spool. Be careful not to let the string snap back at you.
  3. Insert one end of your new string into the eyelet or hole on the spool's center (it might be labeled "this side out").

Winding the String

Once you've prepared the string, follow these steps to wind it onto the spool:

  1. Wrap the string around the spool, ensuring it winds in the same direction as the arrows or notches indicated on the spool.
  2. Wind the string tightly against the spool, avoiding any gaps or overlap, which could cause kinks or tangles.
  3. Continue winding until you've reached the desired length for your weed eater. A good starting point is about 10' to 16' of string, allowing for around 8" to 12" of sticking out of the trimmer head after assembly.
  4. Once you've reached the desired length, maintain the tension and cut the string at the correct length using scissors or a sharp knife.
  5. Measure and cut the string on the opposite side, leaving about 4" to 6" of loose string on the line end.

With both ends of the string cut to the correct length, your Worx weed eater is now ready for reassembly.

AD

Reassembly

Reassemble your Worx weed eater by following these steps:

  1. Insert the spool back into the weed eater, ensuring the line end sticks out of the trimmer head hole.
  2. Relock or reattach the spool cover, ensuring it's secure and functioning correctly.
  3. Pull the excess string from the trimmer head and cut it to your desired working length (usually around 8" to 12").
  4. Test the string tension by pulling gently on both ends. If the string feels too loose or too tight, adjust the spool as needed.

Congratulations! You've successfully strung your Worx weed eater and are ready to tackle those overgrown weeds once more.

Remember, regular maintenance and proper use of your Worx weed eater will extend the life of the string and your machine. Keep your weed eater clean, lubricate moving parts as recommended, and store it properly when not in use. Happy gardening!

AD