Master Stihl Weed Eater Respool: Step-by-Step 2022
Is your Stihl weed eater not running as smoothly as it used to? It might be time to respool the line. Respooling your weed eater's line not only ensures optimal performance but also prolongs the life of your tool. Don't let this crucial maintenance task intimidate you – with a little know-how, you can respool your Stihl weed eater like a pro. Here's a comprehensive guide to help you through the process.
Before we dive into the steps, let's ensure you have the right tools and replacement parts. You'll need a new spool of line, scissors or a line cutter, and perhaps some gloves to protect your hands from rough materials. Stihl recommends using their official-purpose cutFast or RapidCut line for optimal performance. Now, let's get started.
Preparation and Disassembly
Begin by unplugging your Stihl weed eater and ensuring it's cooled down before you start working on it. Safety first, right?
Next, remove the cover by unlatching the bump-feed head. This usually involves sliding a tab or pushing a button. The cover should come off easily, revealing the spool inside.
Removing the Old Spool
To extract the old spool, locate the spool retaining pin. This pin secures the spool in place. Remove it by gently pulling it outwards. The spool should then slide out of the head easily.
Once the spool is out, you can remove any remaining line from the spool. Don't throw it away just yet; you might need it to measure the new line.
Measuring and Cutting the New Line
Stihl recommends using lines of different lengths based on your specific weed eater model. Generally, for a standard trimmer, you'll want a line that's 50 to 100 feet long. Unroll the new line and lay it flat on the ground to measure it correctly.
Using the old line as a reference, cut the new line to the appropriate length. Remember to account for the line that will stay inside the spool. Also, ensure the new line is the same diameter as your old line; incorrect line diameter can lead to improper trimmer speed and performance.
Installing the New Line and Reassembly
Now that you have your new line ready, it's time to respool it onto the old spool or a new one, depending on its condition.
If you're reusing the old spool, make sure to clean it to remove any debris or residue. This will help prevent the new line from getting dirty or damaged during use.
Respooling the Line
Start by attaching one end of the line to the spool. The best way to do this is by looping the line around the spool's center post (the hole from which you removed the retention pin), tucking the end through the loop, and pulling it tight.
Begin winding the line around the spool. Ensure that you're winding it evenly and in the correct direction – most spools have an arrow or a 'wind' indication. Winding in the wrong direction can cause the line to feeding incorrectly or even break during use.
After you've wound the line, leave enough line – usually around 6 to 10 feet – hanging off the spool. This will be the line that feeds out of the head and through the bump-feed mechanism.
Reattaching the Spool
Slide the spool back into the weed eater head, ensuring the line feed end goes through the hole and comes out the bottom. Replace the spool retention pin to secure the spool in place.
Now, reattach the bump-feed head cover. Ensure it's securely latched in place.
Testing the Line Feed
Before you start trimming, test the line feed mechanism to ensure it's working correctly. With the weed eater still unplugged, hold the bump-feed head against a hard surface – like the ground – and bump the head gently. The line should feed out smoothly and evenly.
The first time you bump-feed the line, it may not feed out as much as usual. This is normal; simply use the bump-feed again after trimming, and it should feed normally.
Congratulations! You've successfully respooled your Stihl weed eater. With regular maintenance, including timely respooling, your weed eater will serve you well for years to come. Happy trimming!