how to replace pull cord

Easy Steps to Replace Pull Cord: A DIY Guide

By William Johnson
AD

Is your lawn mower's pull cord giving you trouble? Learning how to replace a pull cord can save you time and money, keeping your mower running smoothly. This guide will walk you through the process with easy-to-follow steps, ensuring you get back to your lawn care tasks without delay.

Whether your pull cord has snapped, frayed, or simply worn out over time, replacing it is a straightforward process that doesn't require professional help. Just gather the necessary tools and follow the instructions below to restore your mower's Starting power.

Understanding the Pull Cord Mechanism

Before diving into the replacement process, it's essential to understand how the pull cord works. It's part of a system that rotates the mower's flywheel, which in turn spins the engine's crankshaft. knowing this will help you visualize the process and ensure the new cord operates correctly.

AD
How to Fix a Broken Pull Cord
How to Fix a Broken Pull Cord
How to Replace Lawn Mower Pull Cord (step-by-step) - Lawn Chick
How to Replace Lawn Mower Pull Cord (step-by-step) - Lawn Chick
How to Replace an Engine's Pull Cord
How to Replace an Engine's Pull Cord

The pull cord connects to aeka pulley at the top of the mower's engine. When you pull the cord, it rotates the pulley, which is connected to the flywheel by a cloth-covered cable. This cable, called a flex cable, transmits the rotation motion from the pulley to the flywheel. Once the flywheel gains enough momentum, it engages with the engine's crankshaft, starting the engine.

Preparation: Gather Tools and Materials

To replace your lawn mower's pull cord efficiently, you'll need to gather a few essential tools and materials:

how to fix a starter recoil fast
how to fix a starter recoil fast
How to replace a trimmer pull cord/string.
How to replace a trimmer pull cord/string.
  • Replacement pull cord, ideally the same length and type as the original
  • Adjustable wrench
  • Phillips or flathead screwdriver (depending on your mower's model)
  • Socket wrench and socket set (if necessary for removing the mower's cover)
  • Pliers
  • Rubber gloves (optional but recommended for safety)

Safety First: Prepare Your Lawn Mower

Before starting the replacement process, ensure your mower is safe to work on. Follow these safety precautions:

  1. Allow the mower engine to cool down completely to prevent burns.
  2. Disconnect the spark plug wire to prevent accidental starting. You can use a rubber band to secure the wire and prevent it from touching the spark plug.
  3. Lay the mower on its side to access the pull cord housing more easily.

Removing the Old Pull Cord

With your mower prepared and tools gathered, you can begin removing the old pull cord. The process may vary slightly depending on your mower's make and model, but the following steps should provide a general guide:

AD

Access the Pull Cord Housing

To access the pull cord housing, you'll need to remove any protective covers or shrouds around the engine. Most mowers have multiple bolts or screws securing the cover, so use an adjustable wrench or screwdriver to remove them.

In some cases, you may need to use a socket wrench to remove larger bolts. Be sure to work in a well-lit area and have your tools organized to make the process more manageable. Once the cover is removed, you should see the pull cord housing, which resembles a plastic or metal casing with a hole for the cord to pass through.

Remove the Old Pull Cord

With the cover removed, you can now access the old pull cord. First, locate the end of the cord connected to the pulley. It should be tucked inside the housing, with the other end extending out through a hole. Use pliers to gently pull the exposed end of the cord to release it from the housing.

AD

Be careful not to damage the pulley or the flex cable connected to it. If the cord is difficult to remove, you may need to wiggle it gently or use pliers to apply gentle pressure while rotating the pulley in the same direction as when starting the mower.

Installing the New Pull Cord

With the old pull cord removed, you can now install the new one. The process is fairly straightforward, but it's essential to follow the steps carefully to ensure the cord is properly seated and aligned.

Thread the New Pull Cord

Begin by passing the new pull cord through the hole in the pull cord housing. Make sure the end connected to the pulley is threaded through first, with the loose end extending out through the hole. This will facilitate a smoother replacement process and prevent tangling or strained during usage.

AD

Once the cord is threaded, secure the pulley to prevent it from rotating while installing the new cord. You can do this by using pliers to gently grasp the pulley and hold it in place.

Secure the New Pull Cord

Now that the new pull cord is threaded, it's time to secure it to the pulley. First, insert the end of the cord into the small hole on the pulley's side. This hole is designed to accommodate the cord, so it should fit snugly.

With the cord inserted, use pliers to gently pull on the loose end of the cord, ensuring it's firmly seated in the pulley's hole. Be careful not to pull too hard, as this could cause the cord to break or become damaged. Once the cord is securely attached to the pulley, you can release your grip on the pulley and allow it to rotate freely.

Reassemble and Test Your Lawn Mower

With the new pull cord installed, you can now reassemble your lawn mower and test its functionality. Begin by replacing any covers or shrouds you removed earlier, ensuring they are properly secured according to the manufacturer's instructions.

Once the cover is reattached, reconnect the spark plug wire and prepare the mower for testing. Wearing appropriate safety gear, such as gloves and long pants, pull the new cord gently but firmly to start the engine.

The first few pulls may require a bit more force, but the engine should start relatively easily once it's primed. If the engine doesn't start right away, you may need to adjust the pull cord slightly or check for any obstructions in the carburetor or air filter.

Break-in Your New Pull Cord

After successfully starting your lawn mower with the new pull cord, allow the engine to run for a few minutes to break in the cord. This process helps distribute the cord's coating evenly and ensures it functions smoothly during future starts.

While the engine is running, you can gently pull the cord a few more times to help distribute the coating. Be careful not to pull too hard, as this could damage the cord during the break-in process.

Congratulations! You've successfully replaced your lawn mower's pull cord and restored its starting power. Regular maintenance, such as periodic cleaning and lubrication of the pull cord, will help ensure its longevity and keep your lawn mower running smoothly for years to come.

Now that you know how to replace a pull cord, you'll be prepared to tackle this common maintenance task and keep your lawn mower in top condition. Happy mowing!

AD