how to replace pull cord on ceiling light

Step-by-Step DIY: Replace Ceiling Light Pull Cord

By Rachel Allen
AD

Ever found yourself in a dark room, staring at a lifeless ceiling light, wondering what happened to the pull cord? It's a common issue, but replacing it is an easy DIY task. This comprehensive guide will walk you through the process, so you can get your light back on in no time.

Before we dive in, it's crucial to ensure safety. Always turn off the power to the light fixture at your circuit breaker. Then, use a non-contact voltage tester to confirm that the power is indeed off. Now, let's get started.

Gathering Tools and Materials

To replace your pull cord, you'll need a few tools and some replacement parts. Here's what you'll need:

AD
Pull Chain Light Fixture to Light Pull Switch
Pull Chain Light Fixture to Light Pull Switch
How to Pull Chain Light Switch Replace
How to Pull Chain Light Switch Replace
How to Replace a Pull-Chain Light Fixture
How to Replace a Pull-Chain Light Fixture

  • Screwdriver (typically a Phillips head or flathead, depending on your fixture)
  • Pliers or wire cutters
  • New pull cord and toggle (ensure it matches your existing one)

CHANGING A PULL CHAIN LIGHT FIXTURE
CHANGING A PULL CHAIN LIGHT FIXTURE
Pedraza Lights (and how to convert a plug-in fixture to a ceiling mount) - Bower Power
Pedraza Lights (and how to convert a plug-in fixture to a ceiling mount) - Bower Power

Preparing the Fixture

First, you need to access the cord. Depending on your fixture, you might need to remove a canopy or escort cover:

AD
  1. Using your screwdriver, remove the screws securing the canopy or escutcheon.
  2. Gently pull down on the canopy to expose the cord and cord grip.

Removing the Old Cord

Now, it's time to remove the old cord:

AD
  1. Use your pliers or wire cutters to cut the cord about 6 inches from the toggle. This will give you enough length to work with.
  2. Pry off the old toggle using your screwdriver. It might be stuck on, so you might need to use some force.
  3. Remove the cord grip. It's usually a small metal piece that you can bend open and remove.

Installing the New Pull Cord

With the old cord out of the way, you can now install the new one:

AD

Threading the New Cord

Start by threading the new cord through the hole in the fixture, followed by the new cord grip:

  1. Feed the end of the new cord through the hole in the ceiling.
  2. Slide the new cord grip onto the cord and pull it up to secure it to the ceiling.

Attaching the New Toggle

Finally, attach the new toggle:

  1. Slide the new toggle onto the cord. Make sure it's faced the right way - it should sit flush against the cord grip.
  2. Pull the cord gently to test the toggle. It should move smoothly without catching.

Now that your new pull cord is installed, you can turn the power back on at your circuit breaker. Give the cord a pull, and your ceiling light should turn on. If it doesn't, double-check your connections and ensure the lightbulb is screwed in properly.

And there you have it! A smooth, professional replacement job.

AD