how to replace craftsman weed eater string

Replacing Craftsman Weed Eater String: Step-by-Step Guide

By Thomas Clark
AD

Ready to give your trusted Craftsman weed eater a new lease on life? Replacing the string, or line, in your weed eater can greatly improve its cutting efficiency and prolong the tool's lifespan. This step-by-step guide will walk you through the process, ensuring you get the most out of your garden tool.

Before we dive in, ensure you're using the correct type of string for your Craftsman weed eater. The type is usually indicated on the product packaging, and you can also check your user manual or contact Craftsman's customer support for further assistance. We recommend using .080" or .095" diameter Craftsman Gatorline string for optimal performance and durability.

Gathering Your Materials and Tools

First, make sure you have all the necessary tools and materials on hand:

AD
How to replace RELOAD STRING on CRAFTSMAN 20V (or electric) string trimmer
How to replace RELOAD STRING on CRAFTSMAN 20V (or electric) string trimmer
HOW TO Re-String A Weedeater Grass Trimmer
HOW TO Re-String A Weedeater Grass Trimmer
How to Change the String on a Dewalt 20v String Trimmer
How to Change the String on a Dewalt 20v String Trimmer
  • New weed eater string (ensure it matches your Craftsman weed eater's specifications)
  • Scissors or a sharp knife
  • Adjustable wrench (if required)

Preparation

Begin by clearing the area where you'll be working and make sure the weed eater is turned off and cooled down to prevent any accidents. Remove the old line from the spool by pulling it out gently. If there's any tension left, you may need to use an adjustable wrench to loosen the line release spring or spool lock.

Before discarding the old line, check its condition. Worn-out lines are usually frayed, nicked, or have a discolored appearance. If the old line is in similar condition, consider using a lower speed setting on your weed eater next time to extend the life of the replacement line.

Loading the New String

Now that you've prepared the weed eater, it's time to load the new string onto the spool. Start by feeding the new line through the line tube and out through the eyelet at the bottom of the trimmer head:

Threading the Line

Wind the line around the spool in the same direction as the arrow marked on the spool. This direction is crucial for ensuring the line feeds smoothly and correctly during operation. Make sure the line is wound evenly and snugly, without excessive slack or tightness.

AD

As a general rule of thumb, leave around 6" to 10" (15 to 25 cm) of line hanging out of the trimmer head. This length can vary depending on your specific weed eater model and is often indicated in your user manual. If you're unsure, it's better to leave a bit more line than too little, as you can always trim it later.

Securing the Line

Once you've wound the desired amount of line onto the spool, secure the end of the line by tucking it into one of the tabs or slits within the trimmer head. This will prevent the line from unwinding before use.

Now, rewind the line release spring or spool lock, and you're ready to go! To cut the line to the correct length, wait until you're ready to use the weed eater, then start the engine and let the line fully unfurl. Count the number of turns and then measure and cut the line to your desired length using scissors or a sharp knife.

AD

Post-Installation Care

Proper maintenance of your Craftsman weed eater's line will ensure an optimal performance and a long tool lifespan. Here are a few tips to keep in mind:

Inspect Regularly

Regularly inspect your weed eater's line for signs of wear and tear. Check for frays, nicks, or discoloration, which may indicate the line needs to be replaced soon. Always remember that proper use, including using the right speed setting and avoiding hard surfaces, will help extend the life of the line.

For additional longevity, consider storing your weed eater in a cool, dry place and cleaning it regularly. This will help prevent rust and reduce the risk of damaging the line due to improper storage conditions.

AD

Happy gardening! With proper installation and maintenance, your Craftsman weed eater will continue to serve you well for years to come, keeping your lawn and garden looking pristine all season long.

AD