How to Easily Remove Spare Tire From Ford F150
Looking to remove a spare tire from your Ford F150? You're in the right place. Whether you're heading out for a long drive or want to create more storage space in your truck bed, learning how to remove your spare tire is a handy skill to have. We've laid out a simple, step-by-step guide for you below.
Before you start, ensure you have the right tools at hand. You'll need a lug wrench, a car jack, and a helper can be useful too. Safety is crucial, so make sure your vehicle is parked on a stable, flat surface and the parking brake is engaged. Now, let's dive into the process.
Understanding Your Ford F150 Spare Tire Location
First things first, locate your spare tire. On Ford F150 models, it's typically stored under the truck bed, near the rear of the vehicle. Some models may have it in a separate, full-size spare tire carrier at the side or rear of the truck.
Once you've found it, your next step is to unlock the spare tire. You'll see a lever or knob near the tire; turn it clockwise to unlock the spare tire menu.
Preparing Your Truck Bed for Spare Tire Removal
Before you can access the spare tire, you need to lower the tailgate and remove any cargo from the truck bed that might be hindering access. If your truck bed has a tonneau cover, remove that as well.
Now, find the spare tire release lever in the bed of your truck. It's usually located near the rear of the bed, close to the tire. Pull this lever up to begin lowering the spare tire.
Lowering and Removing the Spare Tire
As the spare tire starts to lower, grab the tire by the treads to steady it and prevent it from swinging or rolling. Once it's completely lowered, guide it to the ground, keeping a firm hold on it to avoid any accidents.
With the spare tire on the ground, use your lug wrench to loosen the lug nuts. Ford trucks usually have five lug nuts, so start at the top and work your way around, loosening each nut about a quarter turn. Once they're all loosened, lift the tire off the spare tire carrier, replaced by your regular wheel.
Installing the Full-Size Spare Tire
Now that you've removed the spare tire, it's time to install the full-size tire. Position the tire against the lug bolts, ensuring it's properly aligned with the wheel's rim. Push the tire onto the lug bolts firmly but gently, seating it against the wheel base.
Once the tire is on, use your lug wrench to tighten the lug nuts as much as possible by hand. Then, using the lug wrench and a foot for extra torque, tighten each lug nut firmly. Turn the wrench approximately 45-60 degrees clockwise for each nut, ensuring they're as tight as possible to prevent any wobbling while driving.
Raise and Secure the Spare Tire Carrier
With the full-size tire installed, it's time to raise the spare tire carrier back into place. Use the same lever you pulled to lower the tire, this time pushing it down to lock the carrier back in place.
To ensure the carrier is properly secured, try lifting it slightly. If it raises easily, you may need to give the lever another push to fully engage the lock.
Stow Your Spare Tire and Lug Wrench
Now that your spare tire is out of the way, stow it and your lug wrench safely back in your truck. Many Ford F150 models have a dedicated space under the rear seat for these tools. Always ensure they're secure and won't move around while driving.
And there you have it! You've successfully removed your spare tire from your Ford F150. Next time you need to access it, you'll be a pro. Safe driving!