how to get the spare tire off a chevy silverado

How to Remove Spare Tire from Chevy Silverado

By Joshua Clark
AD

Finding yourself needing to access the spare tire on your Chevy Silverado can be a challenge without the right guidance. Don't let this minor bump in the road derail your plans. We've created this comprehensive guide to help you remove your Chevy Silverado's spare tire efficiently and safely. Let's dive right in.

Before we start, ensure you're in a safe location with enough space to work and the torque wrench recommended for your vehicle's lug nuts. Having a vehicle lifted might make it easier, but it's not a requirement for this process.

Understanding Your Chevy Silverado's Spare Tire

Your Silverado's spare tire is stored in a well near the rear of your truck, covered by a swing-down plastic cap. Before reaching for the tire, familiarize yourself with the tire's location and how to access it.

AD
How to Remove Spare Tire on a Chevy Silverado
How to Remove Spare Tire on a Chevy Silverado
a man standing next to a red truck with its tire on it's stand
a man standing next to a red truck with its tire on it's stand
Replacing a Spare Tire Holder
Replacing a Spare Tire Holder

Equip yourself with the right tools. You'll need a jack, a lug wrench, and a torque wrench suitable for your truck's lug nuts. The exact specifications can be found in your Silverado's owner's manual, or you can consult a Chevy dealership if you're unsure.

Accessing the Spare Tire

Start by locating the spare tire well, usually found on the driver's side rear of the truck. To uncover it, pull the plastic cap away from the tire opening until it swings down, exposing the spare tire.

How to repair rusted wheel wells on a Chevy Silverado part 1
How to repair rusted wheel wells on a Chevy Silverado part 1
How to Change a Tire
How to Change a Tire

Before lifting the spare tire, make sure to engage the parking brake. This will provide additional security while you're lifting the tire.

Removing the Spare Tire

Remove the wheel lug nuts by turning them counterclockwise with your lug wrench. You don't need to remove them all the way, just enough to break their resistance. This will help you control the tire as you lift it.

AD

Using the jack, lift the vehicle off the ground enough to allow you to remove the lug nuts and the tire. Once the lug nuts are off, gently pull the tire away from the vehicle until you feel it release.

Take your time when lifting and setting down the tire to prevent injury or damage to the vehicle.

Replacing the Spare Tire

After you've changed your flat tire, replacing the spare requires reversing the process we've outlined above. Always remember to torque the lug nuts properly after replacing the spare tire.

AD

Use your torque wrench to tighten the lug nuts to the specifications outlined in your Silverado's owner's manual. Generally, for Chevy Silverados, this is around 80 ft-lbs for 17" tires and 68 ft-lbs for 18" tires.

Securing the Spare Tire

Once the lug nuts are secure, firmly push the spare tire back into its well, ensuring it's properly seated. Replace the plastic cover by lifting it up and allowing it to snap back into place.

Lower your vehicle and remove the jack and lug wrench. You're now set to continue your journey, ready to tackle whatever the road throws at you.

AD

Regularly check and maintain your spare tire's condition, including its air pressure and overall wear, to ensure it's ready to use when you need it. Safe travels in your Chevy Silverado!

AD