how to remove spare tire from honda pilot

Honda Pilot: Easy Steps to Remove Your Spare Tire

By John Miller
AD

The Honda Pilot, a stalwart SUV known for its spacious interior and robust performance, is equipped with a full-size spare tire for emergency roadside situations. However, removing this spare tire when you don't need it can free up valuable cargo space. Here's a step-by-step guide on how to remove a spare tire from your Honda Pilot safely and effectively.

Before we dive into the process, ensure you have the necessary tools at hand. You'll need a jack, the lug wrench provided with your vehicle, and, optionally, gloves and a flashlight for better visibility in poorly lit conditions.

Preparing Your Vehicle and Tools

Finding the spare tire is the first step. In the Honda Pilot, it's typically located under the floor cover in the cargo area or, in some models, beneath a compartment in the rear bumper. Once you've found it, clear the area around the spare tire to ensure you have ample space to work.

AD
How to change tire Honda Pilot SUV
How to change tire Honda Pilot SUV
How to Change Your Own Tires!
How to Change Your Own Tires!
Car Series: Spare Tire {How to Change the Tire}
Car Series: Spare Tire {How to Change the Tire}

Check the condition of your jack and lug wrench. Ensure they're clean, and their mechanisms are functioning correctly. If they're not in good condition, you may want to consider purchasing new ones for safety reasons.

Securing Your Vehicle

Park your vehicle on a flat, stable surface. Engage the parking brake to prevent your vehicle from rolling. If possible, use wheel chocks to further secure your vehicle. This step is crucial for your safety and the success of the operation.

2006 Honda Pilot With Full Size Spare Tire! No More Small Donut Spare Tire
2006 Honda Pilot With Full Size Spare Tire! No More Small Donut Spare Tire
Car Series: Spare Tire {How to Change the Tire}
Car Series: Spare Tire {How to Change the Tire}

Turn off your vehicle's engine and remove the key from the ignition. This step is essential to prevent any electrical interference while you're working under the vehicle.

Preparing the Spare Tire

The spare tire in your Honda Pilot is typically secured by a cable or a lock nut. You'll need to release this before you can remove the tire. Consult your vehicle's owner's manual for specific instructions on how to release the spare tire's securing mechanism.

AD

Once the securing mechanism is released, you can begin to loosen the lug nuts on the spare tire using your lug wrench. Loosen them about three to four turns, but don't remove them completely just yet. The lug nuts are.trimed (a term meaning they have a specific pattern of being set), so it's essential to keep track of how they were positioned.

Lifting Your Vehicle with the Jack

Position your jack according to the instruction manual provided with your vehicle. The jack should be placed on the designated point on your vehicle's frame, not on the fender or bumper. Slowly elevate your vehicle until the spare tire is about six inches off the ground. This gives you enough room to work and remove the tire.

Once your vehicle is lifted, it's time to remove the lug nuts and the spare tire completely. Continue turning the lug nuts counterclockwise until they're free, then gently pull the tire towards you while supporting its weight to prevent it from falling. You should hear a popping sound when the tire's rim comes off the lugs.

AD

Storing Your Spare Tire

Now that the spare tire is removed, store it safely in your garage or trunk, ensuring it's secure and won't shift around while driving. If you're planning to carry the tire in your trunk, consider using a tire carrier or a spare tire net to keep it in place.

retourn your vehicle to its original position by lowering it slowly and carefully using the jack. Once the vehicle is on the ground, push down on the trunk or rear hatch to ensure it's fully seated. Check that all your tools are accounted for and put them away securely.

Reinstalling the Spare Tire (If Needed)

If you had to use the spare tire and now want to replace it with your original tire, follow the reverse process. Make sure to align the lug nuts with their original positions and tighten them by hand as much as possible before lowering your vehicle with the jack.

AD

Once your vehicle is on the ground, give the lug nuts a final tightening with your lug wrench. Remember to keep your spare tire well-maintained and inspected regularly to ensure it's ready when you need it.

Driving off with a removed spare tire can be a liberating feeling, as it opens up more cargo space in your Honda Pilot. However, always ensure you're fully prepared and follow safety guidelines before attempting this task. happy driving!

AD