how to get spare tire off gmc sierra

How to Remove Spare Tire from GMC Sierra: Step-by-Step Guide

By Robert Martin
AD

Ever found yourself in a bind, miles away from home, with a flat tire on your GMC Sierra? Fret not! Here's a comprehensive guide on how to safely remove your spare tire, keeping you and your vehicle secure, and getting you back on the road in no time. Let's dive in!

Before we start, ensure you're parked on a stable, level surface, and have engaged the parking brake. Grab your owner's manual - it's your Bible when it comes to specific details about your GMC Sierra. Having a jack, lug wrench, and your spare tire at hand is also crucial. Now, let's get rolling!

Understanding Your GMC Sierra's Tire Changing Process

The first step is to familiarize yourself with the tire-changing process specific to your GMC Sierra. This knowledge will help you navigate through any unexpected challenges.

AD
How to Remove Spare Tire on a Chevy Silverado
How to Remove Spare Tire on a Chevy Silverado
there is a tire wrench on the ground next to a red car with it's front wheel up
there is a tire wrench on the ground next to a red car with it's front wheel up
How to Change a Tire
How to Change a Tire

Location of Your Spare Tire

In most GMC Sierra models, the full-size spare tire is usually located in the cargo area. In some cases, especially for 2019 and newer models, it might be a temporary 'limp mode' spare. Check your owner's manual for precise location details.

Using the Tire Jack & Lug Wrench

Your jack and lug wrench are essential tools for this process. The jack lifts your vehicle off the ground, while the lug wrench helps you loosen and remove the lug nuts securing your tire. Both tools are usually stored in your truck's bed or interior.

Replacing a Spare Tire Holder
Replacing a Spare Tire Holder
DIY Mount for spare tire in the truck bed
DIY Mount for spare tire in the truck bed

Once you've gathered your tools and have a good understanding of your vehicle's specifics, it's time to get down to business.

Removing the Flat Tire

Now we'll delve into the step-by-step process of removing the flat tire from your GMC Sierra. Remember, safety first. Ensure you're wearing appropriate attire, and if needed, use safety glasses to protect your eyes.

AD

Lifting Your GMC Sierra with the Jack

Firstly, place the jack under the vehicle frame near the tire you'll be changing. Do not place it under the bumper or any other part since it could damage your vehicle. As you turn the jack's handle, lift the vehicle until the flat tire is about six inches off the ground.

Loosening the Lug Nuts

Before you start loosening the lug nuts, visually inspect them to see if they're rusted or tight. Using your lug wrench, turn the lug nuts counterclockwise until they're loose - typically one turn is sufficient. If they don't budge, you might need to give them some force, but be careful not to round off the nut's edge.

Now that you're up and running, let's put the spare tire on and get you back on the road.

AD

Installing the Spare Tire

The process of installing the spare tire is essentially the reverse of removing the flat one. But before you dive in, ensure you're lifting your GMC Sierra with the jack in the same position - near the tire, not under it!

Mounting the Spare Tire

Position the spare tire at the hub, ensuring it's properly aligned with the lug bolts. Then, push the tire firmly onto the hub until the lug bolts show through the rim. Don't tighten the lug nuts yet - you'll want to that while the vehicle is still raised.

Tightening the Lug Nuts

Now that your spare tire is mounted, start tightening the lug nuts by hand as much as you can. Use the lug wrench to give the nuts a quarter turn in a clockwise direction. Repeat this process until all lug nuts are as tight as possible.

AD

Once you've securely attached the spare tire, lower your GMC Sierra using the jack until the tire touches the ground but isn't bearing any weight. Remove the jack, tighten the lug nuts again - you should be able to give them another turn or two - and lower your vehicle fully.

Give your spare tire a gentle tug to ensure it's securely attached. And there you have it! You've successfully swapped your flat tire for a spare. Before you hit the road, check your tire pressure and get your flat tire replaced as soon as possible.

Congratulations! You've just expanded your GMC Sierra know-how and proven that you can handle unexpected roadside challenges. Now go forth, drive confidently, and enjoy the journey.”

AD