Remove Spare Tire 2011-2021 Ford F150: Expert Guide
If you're a proud owner of a Ford F150, you might have found yourself in a situation where you need to remove the spare tire. Whether it's for easier access, transportation, or replacement, we've got you covered with this step-by-step guide. Let's dive into the process, ensuring your safety and the protection of your vehicle.
Before we begin, ensure you have the necessary tools: a lug wrench, a jack, and if required, a wheel lock key. Remember, safety is paramount when dealing with vehicle maintenance. Always apply the parking brake, engage the first gear (or Park if it's an automatic), and use wheel chocks to secure the vehicle.
Accessing the Spare Tire
The first hurdle is reaching the spare tire. The F150's spare tire is typically located underneath the truck bed, secured by a winch cable. You'll need to lower it using the cable's release mechanism. But first, ensure the truck is on a level surface.
Many F150 models use a similar process. Locate the winch handle (usually in the bed, secured by a tether) and turn it clockwise until the spare tire reaches the ground. Some models may have an electronic release located in the cabin. Consult your owner's manual for specific instructions.
Preparing the Spare Tire for Removal
Once the spare tire is on the ground, use the lug wrench to loosen the tire's lug nuts. You might need to use some force, so it's okay to stand on the wrench if necessary. Turn the nuts counterclockwise about a quarter to a half turn. Do not remove them completely just yet.
Next, deploy the jack to lift the vehicle. Place the jack under the vehicle frame, near the tire you want to remove. Most F150s have a specified jack point location, so consult your owner's manual if you're unsure. Crank the jack until the tire is about six inches off the ground.
Removing the Spare Tire
With the tire off the ground, you can now unscrew the lug nuts the rest of the way and remove the tire. It should slide off easily. This is the point where you'll notice that the spare tire is smaller and has a different construction than your regular tires. It's designed for temporary use only, up to a maximum speed limit.
Now, you can place the removed tire onto the wheel base of the spare tire. Align the lug bolt pattern and slide the spare tire onto the hub, ensuring all lug bolts engage the wheel. Replace the lug nuts by hand and tighten them as much as possible, using an alternating pattern to ensure even distribution.
Securing the Spare Tire Back into Place
With the spare tire now in place, it's time to hoist it back up. First, lower the vehicle using the jack until it's no longer supporting the weight of the truck. Replace the lug wrench and loosely tighten the lug nuts using your hand.
Once the spare tire is secured, use the winch cable to hoist it back up. Turn the winch handle counterclockwise, keeping the cable aligned with the winch housing. Secure the winch handle once the tire is back in place. Tighten the lug nuts using the lug wrench, ensuring each nut is as tight as possible.
Stowing the Tools and Re-checking the Tire
After securing the spare tire, stow the jack, lug wrench, and winch handle back in their designated locations. Ensure everything is secure and properly stowed. Re-check the tire pressure of your now-replaced tire and, if necessary, adjust it to the recommended PSI.
It's always a good idea to periodically check your spare tire's condition and pressure. Spare tires can lose pressure over time, so make it a habit to check it once a month or every 3,000 miles.
And there you have it! You've successfully removed and replaced the spare tire on your Ford F150. Don't forget, if you have any doubts or encounter any issues, always consult your owner's manual or a professional mechanic. Safe driving!