How to Remove Commercial Door Knobs
Have you ever found yourself in need of a change in your home's aesthetic, only to be hindered by the door knobs that don't quite fit the new theme? Or perhaps you're seeking to upgrade your commercial space with a more modern, cohesive look. Regardless of your reason, removing commercial door knobs can be a simple and rewarding DIY task. Let's delve into a step-by-step guide on how to achieve this with ease and safety.
Before we start, it's crucial to gather the right tools and ensure you're comfortable performing this task. The process involves basic tools and a minimal risk of injury if done correctly. So, let's arm ourselves with patience, a screwdrriver, an Allen wrench, a hammer, and possibly a chisel, depending on the knob's type.
Understanding Your Door Knob
Before delving into the removal process, it's essential to understand the mechanism behind your door knob. Commercial door knobs typically come in two common types:.round, lever-style handles and entry sets with separate levers and roses (the decorative plate attached to the door).
The key differences lie in the way they're attached to the door. Round, lever-style handles usually have a single screw securing them, while entry sets require removing both the lever and rose. Knowing this.layout will help you approach the task with the right expectations and tools.
Round, Lever-Style Handles
For round, lever-style handles, the process is straightforward. Start by removing any decorative coverings or screws that might be hindering access to the main screw. Using a Phillips or flathead screwdriver, depending on the screw type, turn the screw counterclockwise to remove it. With the screw out, gently pull the handle away from the door until it slips off the latch mechanism. Voila! Your old handle is now off.
If the handle is stuck or won't budge, it's possible that the screw has stripped or the handle is painted over. In such cases, you may need to use a wider blade screwdriver or a specialty tool to pry it off. If all else fails, don't hesitate to seek professional help, as nobody wants a broken door or knob in their hands.
Entry Sets with Separate Levers and Roses
Entry sets with separate levers and roses can look elegant but tend to be more complicated to remove. Begin by removing the decorative screws on the lever and rose using an Allen or Phillips screwdriver, depending on the screw type. Once the screws are off, gently pry the lever and rose away from the door using a flathead screwdriver or a chisel with caution, working around the edges slowly and carefully to avoid damaging the door.
With the lever and rose removed, you'll be left with the latch mechanism exposed. To remove the entire mechanism, you'll likely need to drill out the securing screws using a drill bit that matches the screw's diameter. Once drilled, the mechanism should slide out easily, leaving you with a clean slate for your new knob.
Preparing Your Door for the New Knob
With your old knob removed, it's time to prepare your door for the new one. For doors with pre-drilled holes, the process is straightforward. simply line up your new knob with the existing holes and attach it using the provided screws.
However, if the existing holes are too small for your new knob or not in the right location, you'll need to drill new holes. Use a drill bit that matches the diameter of your new knob's mounting hardware, and drill slowly and carefully, using the old holes as a guide. After drilling, screw in your new knob, ensuring it's secure and aligned correctly.
Remember, patience and care are key when dealing with tools and hardware. With the right approach, removing commercial door knobs can be an empowering experience that leaves you with a home or office space that truly reflects your style. Don't be afraid to take your time and enjoy the process – after all, you're transforming your space one knob at a time!