how to put string on a stihl weed eater

How to String a Stihl Weed Eater

By Christopher Clark
AD

Looking to maintain your lawn or garden with a Stihl trimmer? One crucial aspect of upkeep is ensuring your weed eater's string, or line, is in optimal condition. Over time, it can fray, break, or simply wear out, requiring replacement. Here's a step-by-step guide on how to put new string on your Stihl weed eater, ensuring a smooth and efficient trimming experience.

Before you start, gather your materials: a new spool of string, gloves for safety, and a screwdriver, as Stihl trimmers might require a Philips or flathead depending on the model.

Understanding Your Stihl Trimmer's Head

First, familiarize yourself with the trimmer head. It's the part where the string is housed. Stihl trimmers use either a semi-automatic or bump-feed head. Understanding which one you have is crucial.

AD
a man wearing sunglasses is holding an object in his hand and taking a picture with the phone
a man wearing sunglasses is holding an object in his hand and taking a picture with the phone
How To Refill a Spool on Stihl FSA 57 String Trimmer - AutoCut C 3-2 Linehead
How To Refill a Spool on Stihl FSA 57 String Trimmer - AutoCut C 3-2 Linehead
Change String Stihl Weedeater Easy Method ! Bump Feed Head / Test Run
Change String Stihl Weedeater Easy Method ! Bump Feed Head / Test Run

Semi-automatic heads dispense line with a simple tap on the ground, while bump-feed heads require a firm bump on the ground to release more line. The process of changing the string differs slightly for each type.

Disassembling the Trimmer Head

Regardless of the head type, the first step is to remove the old line. Start by unplugging your weed eater and wearing gloves to protect your hands from any sharp edges or strings.

Easy Feed Nylon Head
Easy Feed Nylon Head

Remove the protective cover (usually black or red) by releasing the tabs. Then, unscrew the trimmer head with your screwdriver. The direction of rotation might be indicated (counterclockwise most of the time). Once unscrewed, the head should come off easily.

Removing the Old Line

Now that the head is off, pull out the old string. You might need to cut it with scissors or pliers if it's stuck. Look for a small hole where the string comes out. Insert a thin object like a pencil or nail into this hole to release the line. Wiggle it firmly but gently until the old string is completely out.

AD

Some heads have a notch or a mark indicating where to cut the line. If yours does, make sure to line up the new string with this mark for proper installation.

Loading the New String

Now that the old string is out, it's time to load the new one. The process differs slightly depending on your trimmer head type.

Loading Semi-Automatic Heads

For semi-automatic heads, start by inserting the string through the hole in the side of the head. Pull about 10-12 inches of string through, leaving a small loop at the end. This loop will act as a Lance for your line to wind around.

AD

Next, wind the string around the spool in a counterclockwise direction (or the direction indicated in your user manual). Ensure the string is laid flat against the spool and not overlapping. Keep winding until there's about 6-8 inches of string left. Leave this as a straight piece for feeding.

Loading Bump-Feed Heads

Bump-feed heads are a bit more complex. Start by inserting the string through the hole on one side and out through the slot on the opposite side. Pull about 10-12 inches of string through.

Wind the string around the spool in a counterclockwise direction, ensuring it's laid flat against the spool. The amount of string to leave for feeding can vary, so it's best to consult your user manual for the exact measurement. Typically, it ranges from 6 to 12 inches.

AD

Reassembling the Trimmer Head

With your new string loaded, it's time to reassemble the trimmer head. First, ensure the string is aligned with the notch or mark, if there is one. Then, replace the head onto the trimmer shaft by screwing it back on.

Reattach the protective cover and ensure all tabs are securely locked. Finally, plug in your weed eater and follow the instructions for your specific model to dispense the line. It might simply be a matter of holding the button down or gently tapping the ground.

Testing Your New String

Before you start trimming, test your new string to ensure it's feeding correctly. Make a few test runs in a safe, open area. If the line isn't feeding correctly, double-check your installation and alignment.

Once you're satisfied with the line feed, you're ready to trim. Remember, always follow safety guidelines when using your Stihl trimmer, such as wearing protective gear and keeping children and pets away from the work area.

Regularly replacing the string on your Stihl weed eater not only ensures efficient trimming but also prolongs the life of your trimmer. So, keep your grass trimmed and your trimmer in prime condition with these simple steps. Happy gardening!

AD